Valve Adjustments

[jake42]

I agree with Mark on the tightness issue.  On my left side valves they were less than .04 and there's no way you could force it in there.  The shim would bend and crumple before you got it in there.  On my right side valves I could get the .04 in easy, so i tried .05 and eventually .06.  The .07 would not go through so I figured my clearance on that side is between .04 and .06 something which is right in the range.  On the left side I'm gonna pull the shims because I know they are less than .04 and probably less than .03.

Jake