News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

engine knocking

Started by scootr9718, July 22, 2004, 11:03:04 PM

Previous topic - Next topic

scootr9718

ok, so my engine knocks a bit at idle, not consistently, but in and out. I just changed the oil, thinking that might help. But, it's still there...any thoughts? :dunno:
'03 SV650S, Copper, Frame Sliders, Rear Cowl, M4 Slip-on, Carbon stuff

johncam4

your gas.... its not all burning at the top of the compression stroke....something like that...try better gas

Kerry

Do a search for camshaft endplay, using the Search for all terms option.  Read through the message threads that are returned.  Currently there are only two.

. . . . . . . . . .

Does any of that seem to describe / explain the noise you're hearing?
Yellow 1999 GS500E
Kerry's Suzuki GS500 Page

scootr9718

The description for camshaft endplay hits it right on the head...more when cold, and comes and goes when hot. It also seemed to be affected if the bike is leaning a bit...when I'm stopped, moving the bike around seems to change it, which would seem to be consistent with the camshaft moving. Are there any long term concerns here? Or damage issues I should worry about?
'03 SV650S, Copper, Frame Sliders, Rear Cowl, M4 Slip-on, Carbon stuff

Kerry

Quote from: scootr9718Are there any long term concerns here? Or damage issues I should worry about?
None that I know of.
Yellow 1999 GS500E
Kerry's Suzuki GS500 Page

mercdude63

BIZZARE! I have the same issue knock when cold, doesn't seem to really go with the RPM speed of the engine but when warm i rarely rarely hear it... it seemed to go away more when i used premium vs. regular gas. I thought it was engine knock from early detonation. Could it be a camshaft moving around??? Is this sort of noise/problem typical of the GS?

jon
94' Purple GS with MODS:

-Srinath bar
-K&N pods
-V&H full exhaust
-Dynojet stage III jetkit
-Shorten/aftermarket turn signals
-URGO mirrors
-Headlight modulator
-Tank pad!!! love that one!
-Progressive springs+PVC spacer
-BT45s

To Be:

-Rearsets
-wider rear + 160/60 radials

SMF spam blocked by CleanTalk