News:

Need a manual?  Buy a Clymer manual Here

Main Menu

clip ons for 2004 gs500f

Started by airbrush, September 13, 2004, 09:19:58 AM

Previous topic - Next topic

airbrush

HI,

Can anyone recommend a source for clip ons in canada? How about the install, are they difficult to do? What about the riding position compared to stock, any comments?

thx :cheers:
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

GRU

check ebay for 37 mm clip-ons
way better than stock
easy to do

jusAgs

what are clip-ons? can someone put up a pic?

airbrush

i read another thread where someone had installed some vortex clip ons and it lowered the bike causing it to bottom out and also created problems with the bike not sitting properly for the kickstand. Has anyone else experienced any problems like this associated with installing clip ons.
jeff - 2004GS500F...custom paint by me, :)

-Maker of GS500 rear huggers/GS500 keychains - get yours

www.custom-airbrush.com
jeff@custom-airbrush.com

GRU

clip-ons are handlebars that attach on the forks


yes, it lowers the bike.....i didin't look close at my friends gsf but maybe you could put them on under the upper triple (the way that is supposed to be).....i made my clip-ons so they are much smaller (the clip-on part is thiner) and it only lowered the bike about 3/4 inch but real clip-ons are much thicker and you may need to lower the front by about 1 1/2 inch

look around the forks under the upper triple and see if there is anything that will be in the way of the clip-on.....if there is nothing then you can put the clip-ons under the upper triple insted of on the top

kyzee

Quote from: jusAgswhat are clip-ons? can someone put up a pic?

here is an example dude...http://www.gstwins.com/forum/viewtopic.php?t=12109
It is not good enough to say that we are trying our best. We must succeed in doing what is necessary.

robo

I wanted to install the clip-ons under the triple but all the cables would hit the fairing.

But you can remove the upper handle bar holder and just raise the forks about 1/2 inch so that you can secure the brackets.

The only problem is that the gauges are mounted to the upper handlebar holder, so you will have to find some way to mount them somewhere.
Blue GS500F

robo

Oh yeah, mounting the clip ons above the triple resulted in a very very low stance. I would imagine mounting them under the triple would be too low, unless you have long arms.
Blue GS500F

dello

what do my eyes see here!!!! Some people with a GS 500 F, the one with the fairing, that I like and I would like to buy! :-)
Excuse me for the OT, but... What do you think about this bike?  Is it funny enouth for a beginner or is it only a commuter?

Thanks for informations!!!!

Dario
Seregno (milan), Italy

SMF spam blocked by CleanTalk