sirinath.... where can i buy the push in bar ends??

[jkstyle834]

i cant find them anywhere.... and what was the size of the handle bar?? thanks!

[jkstyle834]

sorry... srinath i mean.... ^^

[adamwade]

What type of bars do you have?  The stock ones?  I have a set of Srinath's handlebars and they have a 7/8" open end.  I just went and got some Lockhart Phillips bar ends and they worked fine.  I had to shave the rubber down a bit, but that took about 20 seconds.

[bcutrufelli]

i have a set of the 7/8 from lockart  they dont fit my stockers shoulda checkd that first

[bcutrufelli]

where do i find good looking ones forthe stock bars

[adamwade]

Unfortunately the stock bars will only accept screw in type bar ends, and not the rubber expansion style.

[jkstyle834]

well... i have srinath's bar... i just put in on today... i also got targa fairing... they dont work very well toghether... but i got it to work... kinda sqeeze it toghether... but it looks awsome... i just need some bar ends now... i will look for it... thanks guys... and mad props to srinath for making those bars.... i feel more comfortable on those bars than the stock ones... 1+ from me...

[jkstyle834]

http://www.sportbikeshop.com/store/item_001199.html
will these work??

[The Buddha]

Yes they will work and score for the $$$ ... If you wnat it in all the way you might have to shave a little off the shank part on the bar end... easy, its soft aluminum... use some 80 grit sand paper... 3 mins is more than enough. Try it first ...
Cool.
Srinath.

[adamwade]

jkstyle:  those are the exact same ones I purchased, and I also have Srinath's bars.  The nut goes in just fine, but the rubber is just a hair thick.  I had to take a knife and thin down the rubber.  Just shave a little bit off of it.