Exhaust flanges ... last call ...

The Buddha · December 22, 2004, 09:43:44 PM

OK I am running down to the metal place tommorow ... Hope to find a few and get them ... now I have pipe to make a few 01+'s ... not sure exactly how many ... but 5-6 I guess ... and flanges for those hopefully will be there ... so I guess is order up ... Though you will see nothing till first week Jan ... rest assured ... I am going nuts finding stuff ... Then we make stuff ...
Cool.
Srinath.

weaselnoze · December 22, 2004, 09:57:16 PM

scoop em up!

Focer · December 23, 2004, 12:15:42 AM

What will they do?

The Buddha · December 23, 2004, 12:34:33 AM

They let you run a ebay dennis crook close out can for a CBR, GSXR or YZF whihc is BTW $50 new in Stainless ... on a GS like a slip on ...
Cool.
Srinath.

The Buddha · December 23, 2004, 12:37:20 AM

Like this ...
http://www.gstwins.com/forum/viewtopic.php?t=14055
First post has pics from 70_cam_guy ...
They are $40 and shipping ... and I have 89-00 ones ready to send out ...
Just the 01+ is being designed/built.
Cool.
Srinath.

jusAgs · December 23, 2004, 12:46:48 AM

im in

The Buddha · December 23, 2004, 12:56:16 AM

Well 89-00 is ready now ... send me $$ and I'll send it tommorow ... 01+ ... being made ... Yea I said some else last week, but I bought different dia tubing to do 01+ ... mihgt as well sell the 89-00 and make the 01+ ...
Cool.
Srinath.

se7enty7 · December 23, 2004, 01:36:37 AM

Quote from: seshadri_srinathWell 89-00 is ready now ... send me $$ and I'll send it tommorow ... 01+ ... being made ... Yea I said some else last week, but I bought different dia tubing to do 01+ ... mihgt as well sell the 89-00 and make the 01+ ...
Cool.
Srinath.

did you get my package/check?

vegasda9 · December 23, 2004, 05:55:22 AM

Quote from: seshadri_srinathThey let you run a ebay dennis crook close out can for a CBR, GSXR or YZF whihc is BTW $50 new in Stainless ... on a GS like a slip on ...
Cool.
Srinath.

Is there a particular year that you need to purchase a muffler for? Like for a 96-97 CBR 900RR or 97 YZF1000?

The Buddha · December 23, 2004, 08:07:20 AM

Hey Se7enty7 - I got bis box from ya ... didn't open it yet ... looked intact and unrunover by the UPS truck ...
And Vegasda - all those 3 I posted are identical ... Buy a YZF 1000 cos that was 1 year only ... else they all seem the same to me ... some of those blue donuts they have in some seemed to have the offset bolt holes etc ... making for a 1 can fits all ... and I make the adapter plate and mid pipe so makes no diff to me.
Cool.
Srinath.

The Buddha · December 23, 2004, 11:50:06 AM

OK got it ... got 13 ... hope that's not unlucky ... I feel lucky though ... they are a slightly larger dia and have 6 holes drilled in the wrong place and are 3/16th thick instead of 1/4 as before ... but they will work and work well ... so whoooo hoooo ... They didn't make them anymore ... but I found the scrap pile and burrowed till my hands bled and there they were ... order up ... and they get sent starting first week jan ... OK 89-00 some are ready now, some more by first week jan ... so we are good af far as these are concerned ...
Cool.
Srinath.

CAN_Porn*Star · December 23, 2004, 12:00:27 PM

Hello,

I can get a YZF1000 CF wilieco muffler, and I am wondering if your flange will work for that muffler?
I have a 2004 GSF will that effect things?

The Buddha · December 23, 2004, 12:03:19 PM

Yup YZF wiley co is the one, and I am making a 04 design so the answer is yes to all the questions ...
Cool.
Srinath.

CAN_Porn*Star · December 23, 2004, 12:08:14 PM

so the install is pretty painless?
just chop the stock pipe install the muffler using your flange?
do i need to weld it or anything? or can i install it without a welder?

im willing to bet you have been asked this question so manny times.

se7enty7 · December 23, 2004, 12:30:35 PM

Quote from: CAN_Porn*Starso the install is pretty painless?
just chop the stock pipe install the muffler using your flange?
do i need to weld it or anything? or can i install it without a welder?

im willing to bet you have been asked this question so manny times.

no welding needed.

cut close to the last weld before the muffler.. like... 2 inches maybe 2.5 inches at most.

CAN_Porn*Star · December 23, 2004, 12:37:22 PM

great ill be placing a order for the muffler today, who much is this flange going to cost me?

chinox22x · December 23, 2004, 12:43:42 PM

Quote from: CAN_Porn*Stargreat ill be placing a order for the muffler today, who much is this flange going to cost me?

flange and midpipe = 40$ + shipping

jusAgs · December 23, 2004, 10:59:55 PM

am i too late? how/where do i send the $$?

The Buddha · December 23, 2004, 11:07:17 PM

Yea no weld and cut and fit ... however some people have had their share of adventure ... before getting a fit - ask weaselnose ... :lol:
Anyway check is best ... $40 and shipping - Srinath Seshadri 9227 swallow tail lane, Charlotte NC 28269. I dont exactly know how many I have SS pipe for ... if its 89-00 or 01+ indicate that on the check in the memo field. for now I'll take everyone that wants one, might be able to get more pipe, or flanges (that is a huge question mark still) ...
Cool.
Srinath.

jusAgs · December 23, 2004, 11:14:48 PM

how much is shipping? no paypal?

News:

Exhaust flanges ... last call ...

vegasda9