News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Frame Paint?

Started by Nick U, January 05, 2005, 07:42:28 PM

Previous topic - Next topic

Nick U

I have a 1998 GS and my frame has some minor rust that I am currently removing. Does anybody know where I can get the rattle can paint for it?

ashman

double on that question i have a '93 w/ a silver frame.

-ash
Proud owner of a Bandit 600S former owner of a 93 GS500E

JetSwing

doesn't everyone have "rusted" silver frame?  :roll:
My hunch was right...Pandy is the biggest Post Whore!

Dom

Quote from: JetSwingdoesn't everyone have "rusted" silver frame?  :roll:

No, mine's rust colored with silver flakes here and there.  What causes these silver parts?

JetSwing

Quote from: DomNo, mine's rust colored with silver flakes here and there.
man..only if you knew how lucky you are...i envy you.

Quote from: DomWhat causes these silver parts?
i don't know...wheather? environment? one thing for sure...you must immediately sand the silver area...and let it turn rusty!
My hunch was right...Pandy is the biggest Post Whore!

The Buddha

I have seen frames repainted ... this dude did an immaculate job ... He said he used lacquer like 4 super light coats and 3 coats of clear on it ... dude was a maniac... bike was pretty though ... had a bit of overspray on some parts like engine bolts ... but the rest was a beauty ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

treybrad

I copied this down from a post when I got my bike, and it really does match my '94 almost exactly.

QuoteI have a 2000 and I have found a can of spray paint that I feel matches pretty well. I bought it at a Lowes home center. It is "American Tradition" by Valspar. Interior/Exterior Ultra Enamel. Look for a grey cap with the word FLAT on it. Then look on the back where the UPC is. It should say 165887 ALUMINUM. I did some work on my frame with it and I cant really tell where it stops and the normal frame begins

Can't really tell where I have touched it up, it's at least a good way to get by until you can repaint the whole frame.

trey

JetSwing

wouldn't it be much easier to get a runsted color paint?  :roll:

seriously, that's good to know...i may need a touch up at some point.  :thumb:
My hunch was right...Pandy is the biggest Post Whore!

sprint_9

Just do what Im doing and take the bike down to the frame have it blasted and then powdercoated.

pixelmonkey

Quote from: sprint_9Just do what Im doing and take the bike down to the frame have it blasted and then powdercoated.

same here for the 92.
chris<pixelmonkey>:D

V8Pinto

I found a near perfect match in the touch up paint section at Autozone.  I believe it was a Honda silver, I'll check and post in a bit
Shane
306 N2O Pinto
2008 Hayabusa
Production 1350cc Land Speed Record Holder 205.1MPH

SMF spam blocked by CleanTalk