Who wants Light/Horn Bar

[The Buddha]

OK I made some of these ...
Yea I know its a flat piece of steel with 2 holes bend up ...
http://www.gstwin.com/gallery/view_photo.php?set_albumName=member_bikes&id=awv
http://www.gstwin.com/gallery/view_photo.php?set_albumName=member_bikes&id=aww
http://www.gstwin.com/gallery/view_photo.php?set_albumName=member_bikes&id=awx

But the bend will be sharp, these were bent in a vice by moi  ...The final ones  will be like bent with a big ass sheet bender machine, the piece will be powder coated and its all for $10 ...
Cool.
Srinath.

[Dragonfly]

Hmmm very interesting. What exactually are you thinking about using them for??

Could you mount a set of PIAA lights to them!?!?!
How cool would that be?

[The Buddha]

They should take extra lights no problem ... just make sure you have the bracket positioned and fitted with the lights such that they dont get too close to the T/s's ... they are scrap pieces I found ... the problem is the bend ... I want a sharp 90 instead of that wide 90 I got, so we'll have to get it done at a machine/sheet metal shop ... and they only go new metal, cant take shaZam! off the scrap yard, the contaminants will ruin the tools/machines. So it has to be made a fresh and I'll use new steel and crank it out.
Cool.
Srinath.