Tip-over leads to total failure

[cboling]

EDIT: I didn't read the thread all the way through. I see you figured out the problem.

I am probably pulling a real no-no hear but you can bypass the safety switches pretty easily.

There is a switch for the clutch handle (shown above.) The wires for this are inside the headlight bucket. (Yellow Green or Yellow White I think. You can trace those from the handle to the bucket.) Simply disconnect the wires and set them aside inside the bucket. Next re-connect the other 2 wires together which will complete the circuit.

Next take your right side cover off and find the Green covered wire with a black connetor, and a black and white wire with barrel connectors. Disconnect those 2 wires and put a paperclip from the black wire into the green wire plug (on the harness side.)

Now try and start. If you get the same results, I suspect what Buddha said is right. Your ignition push button is bad.

If this is a big no-no, someone tell me and I will delete.

Thanks,
CB