News:

New Wiki available at http://wiki.gstwins.com -Check it out or contribute today!

Main Menu

Crrazy Angle and rear pegs. Questions

Started by dyran, February 25, 2005, 10:15:31 PM

Previous topic - Next topic

dyran

My kickstand is putting my bike at an insane angle and it will probably fall if I actually used it instead of the centre stand...anyone have any idea of why and how to fix this problem. My passenger pegs are busted is there a quick fix or should I get old CBR pegs and go from there?

davipu

just about any set of pegs will fit, I have 03 r6 rear pegs on mine maybe someone shortend the stand? is the bolt tight in there?

starwalt

Here is a pic of the stand on my donor chassis ---


The flat section at the end of the stand is not obvious at this angle. The brown mess in the upper left corner is the center stand.

Could it be that the stand is not swinging all the way out or possibly too far out? This is the only explanation (besides huge non-stock tire/rims) if the stand has not been cut off or damaged (bent) or shortened for some reason.
-=Doug......   IT ≠ IQ.

God save us from LED turn signal mods!

Get an Ebay GS value  HERE.

1990 GS running, 1990 GS work-in-progress, 1990 basket case.
The trend here is entropy

John Bates

Quote from: dyran......... an insane angle ...........

Does that mean too upright or too laid over? :dunno:
----------------------------------------------------
Bikes don't leak oil, they mark their territory.  (Joerg)
----------------------------------------------------


2002 Harley Sportster XLH883 with V&H Straight Shots
Prior owner of 1992 GS500E stock
Fairfield County, OH
USA

Blueknyt

kinda looks like the flat area might have been snagged and straightened out a bit, the tip only touches right?
Accelerate like your being chased, Corner like you mean it, Brake as if you life depends on it.
Ride Hard...or go home.

Its you Vs the pavement.....who wins today?

starwalt

Quote from: Blueknytkinda looks like the flat area might have been snaged and straighten out abit, the tip only touches right?

Naw, the donor is on the center stand. I took this shot from above to give the thread originator an idea of what a complete one looks like. The camera angle makes it look short.

Bates had a good point, is it too low or too high? I am guessing too low when on the kick stand, aka leaned over too far toward the ground.
-=Doug......   IT ≠ IQ.

God save us from LED turn signal mods!

Get an Ebay GS value  HERE.

1990 GS running, 1990 GS work-in-progress, 1990 basket case.
The trend here is entropy

sprint_9

I added a Katana shock and a 150/70 rear tire and my bike really leans over when its on the side stand.  I think Im gonna have to lengthen it somehow.  Thankfully Pablo already has a good solution to the problem as seen on the lower portion of that page.

http://pantablo500.tripod.com/id12.html

dyran

It's on  a steep leaning angle and I have the stock size tires.

Jake D

I bet something happened to it when it was stuck at the bottom of that river.  

:lol:

Just kidding. . .

I'd bet it has a Katana shock on it.  Be happy!  I'm trying to get one too, so my sidestand won't work, just like yours. . .
2003 Honda VTR1000F Super Hawk 996

Many of the ancients believe that Jake D was made of solid stone.

werase643

buy a hockey puck or a small piece of 2 x 4
and put it in your tank bag/under the seat
place under side stand

cheap easy fix

i used to carry a smashed soda can in the tank bag to park in gravel... kept it from sinking in
want Iain's money to support my butt in kens shop

SMF spam blocked by CleanTalk