News:

Need a manual?  Buy a Haynes manual Here

Main Menu

What is a flange ??? - last call

Started by The Buddha, March 31, 2005, 05:26:50 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 4 5
User actions

milo

#40
April 28, 2005, 09:35:14 PM
Hey raylarrabee, congrats on law school! If all goes well I'll be a lawyer in a few weeks as well! (three finals and two papers though... 3rd year has sucked)

:cheers:
Here's to lawyers on motorcycles!

(And, before you others complain about lawyers, just think, lawyers who ride are at least better than lawyers who don't ride...)
2001 GS500 (no letter!)
Progressive springs; Kat600 shock; 15T front sprocket; Wileyco exhaust w/ Srinath flange; rear fenderectomy; Airbrush hugger; desperately in need of rejetting.

The Buddha

#41
April 28, 2005, 09:35:48 PM
Quote from: ktrimwhat would I need a restrictor for?  is there anyway to get the dimensions of the flange to make my own?  I have access to a flow jet, tubing bender and welding equipment.   Im new to the site, I have an 89 gs with only cosmetic mods,  I just bought the wileyco can yesterday.

Well make a round plate and drill it to match the bolt pattern on the can, then take muffler pipe and bend it to fit your header at the bottom maybe and blow a big hole in the round plate with a torch, and weld the plate on the pipe wiht it all held in position on the bike. That's what I was doing.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

quinnbozz

#42
April 28, 2005, 11:31:12 PM
still time to order?


thinkin bout scrapin the dual exhaust idea :x



still not getin anywhear with it  thou school ends in two weeks. then i'll be able to devote more time to it.
what! SOLD!!!  an't that a kick in the nuts
dollar short & a day late, my life story
GIT R' DONE

what EVER floats yer boat as long as it DON'T float MY  WAY

BigTwin

#43
April 29, 2005, 08:11:11 AM
Srinath, sent paypal (I know you don't care for it Sorry) payment earlier today for flange w/choker.

Let me know if you got it, should be under jweather@columbus.rr.com

THANKS, BigTwin
Fixing Up My 2001 GS500: V&H SS Exhaust, fenderectomy, K&N Lunchbox, 147.5/67.5/20 Jetting, Bob B Ignition Advancer, Progressive Springs,  SV650 Chain Guard, And Soon To Have New Rear Shock.

The Buddha

#44
April 29, 2005, 01:12:54 PM
Oh no --- every one's a lawyer ... OK fine give me legaleese when I get in trouble and It be OK ...
Quinnboz - you got time to get flange ... paypal or check. Seshadri_srinath@hotmail.com. or PM me for address for check.
And I got it Jweather@columbus.rr.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

milo

#45
April 29, 2005, 02:52:41 PM
I'm happy to give legal advice for the next few months, before I become a real lawyer -- that way I don't get in trouble if I'm wrong...  :P

Check's inna mail.
2001 GS500 (no letter!)
Progressive springs; Kat600 shock; 15T front sprocket; Wileyco exhaust w/ Srinath flange; rear fenderectomy; Airbrush hugger; desperately in need of rejetting.

raylarrabee

#46
April 29, 2005, 04:44:40 PM
Quote from: miloI'm happy to give legal advice for the next few months, before I become a real lawyer -- that way I don't get in trouble if I'm wrong...  :P

Check's inna mail.


I hope that's not the answer you put down on your MPRE  :nono:
Yellow 2000 Honda VFR800fi

ktrim

#47
April 29, 2005, 05:35:55 PM
Quote from: seshadri_srinathWell make a round plate and drill it to match the bolt pattern on the can, then take muffler pipe and bend it to fit your header at the bottom maybe and blow a big hole in the round plate with a torch, and weld the plate on the pipe wiht it all held in position on the bike. That's what I was doing.
Cool.
Srinath.


what is the restrictor for?   I'm also working on making rearsets.  havent decided on material (ss -vs- alum).   trying to find some dimensions on how far back and up to move them.  I have access to a full fab shop (mig,tig,arc.  flow jet, laser, lathe etc..)  any help on dimensions for rearset,  and restrictor would be great
oops,  you'll need a new one of them

The Buddha

#48
April 29, 2005, 06:57:41 PM
Restrictor is for those that dont want to rejet Immediately ... when you do re jet, remove it ... knock it off with a hammer ... Just a square or round or other shaped plate put in 45 degrees with the flow so it cuts down some ... Noisy but not more flow ... I dunno if it really works well, but its sorta better than nothing, and heck stock was bad enough ... no need to make it worse fitting a WFO can ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

milo

#49
April 29, 2005, 07:55:51 PM
Quote from: raylarrabee
I hope that's not the answer you put down on your MPRE  :nono:

I got in the 90s on the MPRE... at first I thought I did amazingly well. Only a few hours later did I realize that it actually indicates "slightly below average." I guess that means I'm slightly less than ethical.  :thumb:
2001 GS500 (no letter!)
Progressive springs; Kat600 shock; 15T front sprocket; Wileyco exhaust w/ Srinath flange; rear fenderectomy; Airbrush hugger; desperately in need of rejetting.

raylarrabee

#50
April 29, 2005, 09:26:38 PM
Quote from: miloI got in the 90s on the MPRE... at first I thought I did amazingly well. Only a few hours later did I realize that it actually indicates "slightly below average." I guess that means I'm slightly less than ethical.  :thumb:

the important thing is, you're ethical enough for all 50 states and the District of Columbia!  The highest score required for admittance in all the land is an 85 (in NY).
Yellow 2000 Honda VFR800fi

Destro

#51
April 29, 2005, 10:56:20 PM
OK add me to the list, not particular about pipe whatever you are making, just send PM and I will send you a check  :)
-Shayne
'92 GS500
'00 YZF600R

quinnbozz

#52
May 01, 2005, 01:58:55 PM
Quote from: seshadri_srinath
Quinnboz - you got time to get flange ... paypal or check. Seshadri_srinath@hotmail.com. or PM me for address for check.
And I got it Jweather@columbus.rr.
Cool.
Srinath.

dont count me in yet i'm still on the fence i was just checkin :mrgreen:
what! SOLD!!!  an't that a kick in the nuts
dollar short & a day late, my life story
GIT R' DONE

what EVER floats yer boat as long as it DON'T float MY  WAY

ktrim

#53
May 03, 2005, 07:25:56 PM
Is it to late to get a flange?  ifI can still get one,  were do i send the money
oops,  you'll need a new one of them

The Buddha

OK
#54
May 03, 2005, 08:31:15 PM
Ktrim - Flange is still available, but closing fast ... Paypal (seshadri_srinath@hotmail.com, or check to Srinath Seshadri, 9227 swallow tail lane, Charlotte, NC 28269)
Quinnbozz - OK so you want me to make you a fence ...  :lol:  ...
And everyone - The flanges will probably be all steel ... I have SS material for like 12, and over 30 people and counting ... I'd like to have identical stuff so the shop guys can concentrate on having identical items turned out ... having 2 different materials will throw a kink in the thing ... I know I made SS before, but all were SS so we could sorta get it all close enough ...
And new thread is popping up with list ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

apbrian112

#55
May 03, 2005, 08:50:07 PM
money sent via paypal...  :cheers:
-brian-

quinnbozz

#56
May 04, 2005, 08:54:54 AM
k i dont want to hold things up hear so

do NOT count me in  :x  this is what i get for hehawin around
sorry for the desterbince
what! SOLD!!!  an't that a kick in the nuts
dollar short & a day late, my life story
GIT R' DONE

what EVER floats yer boat as long as it DON'T float MY  WAY

The Buddha

#57
May 04, 2005, 09:09:18 PM
I was gonna make you a FENCE Quinnboz ...
You not holding up anyhting ... But I do want to catch the entire lot, cos i am not making more ... Yea the ones that have flanges can now sell them for big bucks ... no more flanges comming ... maybe I should number them ... Under 100 total were made .. heck closer to 60 I think so really collectible, and the fact that the blood of sinners was used to flavor them ... simply precious ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

Venom

#58
May 04, 2005, 09:37:04 PM
Are they avail?  I will pay pal in the morn if they still are  will need one with choker
04 GS 500F:  Katana Shock, aftermarket turn signals, clear brake light, fenderectomy, srinath SM type bars, Corbin tail bag, re- jetted (147.5, 65, 22.5), Wileyco Muff w/srinath flange, and K&N Lunchbox


-->  If at first you don't succeed, destroy all evidence that you tried!  <--

The Buddha

Yea
#59
May 04, 2005, 09:45:22 PM
Its available but closing fast ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------
Print
Go Up Pages 1 2 3 4 5
User actions
SMF spam blocked by CleanTalk