News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

replaced stock airbox, extra hose?

Started by stevemac12073, April 13, 2005, 11:29:55 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

stevemac12073

April 13, 2005, 11:29:55 AM
ok i finally took out my airbox and put in a k&n lunchbox. there is a hose that comes off the top of the engine and connects to the airbox. Now that the box is no longer there, what the heck do i do with the hose?  :dunno:
"f*ck with the bull, you get the horns"
baldor 1/2  fairing, progressives, 13T sprocket(now a 15T), Katana rear shock, Bob B advancer, R1 tailights, wileyco slip on, Srinath clip-ons, rejet, and flange, K&N lunchbox, and so on and so on and so on...........................

sprint_9

#1
April 13, 2005, 11:42:38 AM
Thats the breather hose, what I did is put the stock on back on, then got a coupler and a smaller hose and ran it out the bottom of the bike.  You can also put a breather filter on it and then set it on top of the new air filter.  You could also get one long hose to run out the bottom of the bike, just do something otherwise you might have a mess of oil under your tank.

stevemac12073

#2
April 13, 2005, 11:53:43 AM
cool thanx. :thumb:  would happen to know the size of that hose?
"f*ck with the bull, you get the horns"
baldor 1/2  fairing, progressives, 13T sprocket(now a 15T), Katana rear shock, Bob B advancer, R1 tailights, wileyco slip on, Srinath clip-ons, rejet, and flange, K&N lunchbox, and so on and so on and so on...........................

The Buddha

#3
April 13, 2005, 11:57:49 AM
OK you had me rejet it for the Lunch box ??? I dont remember ... That sheet of paper you sent me is what I did ... if its not for lunch box ... get a pair of 150 main jets large round slotted ... and swap those out.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

stevemac12073

#4
April 13, 2005, 12:00:23 PM
i'm not sure what i wrote on the paper. i know i pm'd you about it though. btw everything fits great, looks awesome.  :thumb:
"f*ck with the bull, you get the horns"
baldor 1/2  fairing, progressives, 13T sprocket(now a 15T), Katana rear shock, Bob B advancer, R1 tailights, wileyco slip on, Srinath clip-ons, rejet, and flange, K&N lunchbox, and so on and so on and so on...........................

The Buddha

#5
April 13, 2005, 12:04:10 PM
Well I did what was in that print out ... open it and see ... better be sure. I forget ... whihc is why I ask for write up/print out with carbs from people man ... I cant look at the net when working on stuff ... If its all apart its a 2 min job. Heck even after it wont take you more than 5 mins with the allen head float screws ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

Jake D

#6
April 13, 2005, 12:05:04 PM
Quote from: stevemac12073i'm not sure what i wrote on the paper. i know i pm'd you about it though. btw everything fits great, looks awesome.  :thumb:

FOOOMPT!

   (sound of head, entering sand).
2003 Honda VTR1000F Super Hawk 996

Many of the ancients believe that Jake D was made of solid stone.

stevemac12073

#7
April 13, 2005, 12:06:32 PM
ok so i don't mess anything up, how do i get them out and how can i tell the difference? the carbs and filter are back on the bike.
"f*ck with the bull, you get the horns"
baldor 1/2  fairing, progressives, 13T sprocket(now a 15T), Katana rear shock, Bob B advancer, R1 tailights, wileyco slip on, Srinath clip-ons, rejet, and flange, K&N lunchbox, and so on and so on and so on...........................

The Buddha

OK
#8
April 13, 2005, 12:09:35 PM
OK Take allen screws off the floats ad take off floats and look at the main jet numbers ... You may need a small mirror ... if it says 150 you are good. If 125 get a pair of 150's from a bike shop, or put air box and paper filter back in.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

stevemac12073

#9
April 13, 2005, 12:11:06 PM
alright, cool thanx again for everything. i'll post some pics when she is all done.
"f*ck with the bull, you get the horns"
baldor 1/2  fairing, progressives, 13T sprocket(now a 15T), Katana rear shock, Bob B advancer, R1 tailights, wileyco slip on, Srinath clip-ons, rejet, and flange, K&N lunchbox, and so on and so on and so on...........................

The Buddha

#10
April 13, 2005, 12:11:41 PM
Quote from: Jake D
Quote from: stevemac12073i'm not sure what i wrote on the paper. i know i pm'd you about it though. btw everything fits great, looks awesome.  :thumb:

FOOOMPT!

   (sound of head, entering sand).

Shuuuuuuuuuuddddd up ....
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

sprint_9

#11
April 13, 2005, 02:14:13 PM
Those allen head float bowl screws should come stock, they saved me alot of work already and Ive only had them on there for a month.
Print
Go Up Pages1
User actions
SMF spam blocked by CleanTalk