Need GS front end help!!!!!!

[iceman]

Hey guys Im new here. I picked up a GS at he start of the season (you guys rock Im lovin' it! Its so nimble!) Anyways long story short a cager cut me off and put me into the curb=front end %$#$%
Bent the tubes and the lover triple clamp and then theres my leg. So Id like to beef up the front end with a GSXR assembly or something from another sportsbike any advice? Where can I go online for help? What can I use for a front end and how much time/money will it set me back?  Any input would be appreciated guys!

[dgyver]

A Katana front end is the easiest to mod to fit. These are cheaper and easier to fit. You should be able to do it for less than $100. Check the FAQ forum for a write up I did.

Most GSXR front ends should fit with some more modifications. Not familar with which ones will fit the easiest. With a GSXR f/e, you will not be able to use the stock speedo pick-up, unless the older ones use a wheel pick-up. They are going to be more expensive at $300-500 minimum.

Do not forget that you will need everything from the donor front end: wheel, rotors, calipers, brakelines, mastercylinder, fender, triple clamp assemble, clip-ons.