Installing the WileyCo (pics)

[Ry_Guy]

Here it is.

The stock pipe. Use your new pipe cutter and cut it 2 inches past the weld, towards the exhaust.





Fitting the flange on takes a little sandpaper, whacking around, and a couple beers. Probably the hardest part. After you install the entire exhaust back on the bike, you'll need to jostle it around some more before bolting on the WileyCo can.


Presto. Rejet the carbs and upgrade your air filter.

Then put on your NEW WILEYCO HAT, WILEYCO KEYCHAIN, and WILEYCO SHIRT!
Gee, Thanks WileyCo!

And thanks to Srinath too! Sorry no pic available for you man. But I don't think you'll mind.

And thanks to Eva for moral support.


I had more than a couple beers.

[94suzuki500]

coolio, you are a true success story
before wileyco gear and can....
after wileyco gear and can....

[MR_PINK]

:lol:  nice pics

[calamari]

Then put on your NEW WILEYCO HAT, WILEYCO KEYCHAIN, and WILEYCO SHIRT!

and pull your zipper up too  

great pics btw  

[The Buddha]

Then put on your NEW WILEYCO HAT, WILEYCO KEYCHAIN, and WILEYCO SHIRT!

and pull your zipper up too  

great pics btw  

Hey this guy's a smarty pants ... You are right up there with my favorite newbie ... OK you're right behind him ... he's the Genius that said "Peetey Pablo" ... on his first post ... You know who you are ...  :lol:  :lol:  :lol:
Cool.
Srinath.

[calamari]

so a bit of humor is not welcomed in this forum?  

[Kerry]

You did just fine.  Welcome, by the way!  

[vfrocket]

Great photos, I will be installing mine as soon as I recieve my flange from srinath. Thanks for the info, i cant wait to put mine on, and the K&N pod, and the stage 3 jet kit and see how it runs!!!

One question though, what do you do about the centerstand stopper?? There is not one on the new flange?

VFR

[Venom]

Got mine done today.  Installed the wileyco, K&N Luchbox, and rejetted.  Can't wait to take it for a ride!!!!

[Ry_Guy]

One question though, what do you do about the centerstand stopper?? There is not one on the new flange?

Good question. The centerstand stopper had to come off with the stock exhaust. I haven't really done anything about it. It seems to rest fine on the frame. Not sure if that's a good idea or bad, but I'll find out.

['04gs500f]

wileyco only gave me a hat and pin...

but thats ok,
when srinath finally gets around to sending out my flange i will get the free srinath preworn (by srinath) thong  

[jakkyl]

Where do you get the Wileyco from?

[ginoe]

thank god!

a newly dated thread for an aftermarket exhaust...

i want one too!!!

[Maireeka]

that's awesome!  great hat!

By the way, I'm a carb n00b (only worked on cars with EFI or CIS systems before I got into bikes), and what exactly does rejetting entail?  

Is it just replacing the jets on the carbs with different ones?

[weaselnoze]

that and putting a washer on the needle.  its really easy

[dgyver]

and pull your zipper up too  

That is one thing a guy should never say to another guy, unless.....

[phire]

and pull your zipper up too 

That is one thing a guy should never say to another guy, unless.....

Never tell a guy his zipper is down. It's his problem - you didn't see anything.

[LimaXray]

idk if you got the memo or not, but it's 2006

thats ok, srinath is selling flanges again so maybe this is a relevant thread

[phire]

idk if you got the memo or not, but it's 2006

thats ok, srinath is selling flanges again so maybe this is a relevant thread

lol I got linked here from his new thread about making flanges, I didn't even bother to look at the date.