Valves Adjusted now it Wont Start!

[acesmike]

YAY! Got It! Timing was off.  Now Just a simple carb adjustment and Ill be on my way! I couldnt have missed out on the wonderful weather here in the bay area cali! Thanks for all your help guys!!!

[The Buddha]

Holy crap ... You're lucky you didn't destroy the thing ... Here after, measure everything ... then when you wanna change it, take the tension out of CCT and do all at 1 time ... then drop them back in the same way they were in there ... You dont exactly need it at TDC to swap shims with the camshafts out.
Cool.
Srinath.

[Ed89]

Holy crap is right.    :lol:  It is always a good feeling when things turn out OK at the end.  Enjoy the summer!

Cheers,
e.

[Anonymous]

Anyone reading this before attempting to do their valves...

DON'T take the cam off!

You can loosen it ever so slightly to get the tool to "stick" holding down the bucket.  Loosen each bolt like 1/4 turn until you can get the tool to stay without popping off the bucket.  Thats it!  Don't take it all the way off.  It will save you a lot of trouble.

Sign up for kerrys valve kit and watch the video.  You CAN do this, it's easy.

[The Buddha]

With tool ... no need to loosen it at all ... No tool = all sorta shetie ...
Cool.
Srinath.

[acesmike]

HAHA 10-4!