What is stock size fuel line?

[banner]

On a tangent here..what is the stock size fuel line?

[jag69]

Posted: Thu Mar 04, 2004 8:29 pm    

--------------------------------------------------------------------------------

I just bought some fuel line from Cycle Gear that seems to match perfectly to the original line. I bought Polyurethane Fuel Line 5/16 I.D. x 7/16 O.D. I will let you know if it works.


This is what I bought last year and I haven't had any problems since.  I also changed out the stock clamps and used screw clamps.  I hope this helps.

[average]

Take a trip to your local AP store and get some fuel line. You will need about 4 ft if your replacing all of them. If you get same guage as i got(autozone) be prepared to struggle abit getting both lines on under the tank.

[davipu]

6mm id  
lee's cycle racing has it in stock.  take the 15 to aero dr west got up about three blocks it's on the right.

[dgyver]

They are 7mm ID

http://gstwins.com/forum/viewtopic.php?t=7256

[ratz]

Huh, I did this last night.
I was desperate, and no cycle shops were open that late.

My concern was crimping ( considering the confined routing around the airbox, and tank) I bought the 5/16id fuel injection line. This stuff is pretty thick, and expensive $.33 an inch!, but it worked great.  Astheticaly, I am not sure I like it, but you can barely see it.

[scottpA_GS]

I got mine from Davipu  :mrgreen:  and it rocks     Helped fix my starvation prob!