How to turn #1 screw extractor / ezout?

[Rema1000]

I bought an EZOut set at AutoZone.  I'm trying to use the #1 screw extractor.  The end of the extractor is a 4-sided shank, coming to a point:


(no, that's not a GS500 in the picture... I broke the brake disc set-screw on a VW).

I'm not sure how best to turn the extractor.  If it had 3 sides, I could put it in a drill.  The extractor packaging says to use a wrench to turn it, but the sides of the 4-sided shank are very narrow (0.112 inches), so it doesn't have much of a flat area for a wrench to grab onto.  

It seems like a miniscule 12-point socket would work (if they made them that small).

[dgyver]

I use a handle from a tap and die set when using extractors.

[davipu]

hammer in the left hand, cresent in the right. tap tap, try to turn. repeat, it will eventually come out

[The Buddha]

Yea that tap and die handle thingy ...
Cool.
Srinath.