Anyone got any flush mount rear turn signals?

[annguyen1981]

If so, please post pic

[that_guy]

I actually Just installed some last night.  Let me go take a pic to share.

[solarpulse]

if you use those that means you can get rid of that nasty license plate holder too eh?......  hmmm i wanna seee these pics cause gosh i hate that big black flap lol

[annguyen1981]

I've got two ideas...  Putting in flush mount signals or this:

http://gstwins.com/gsboard/index.php?topic=23534.0

[budget speed demon]

damn I  like that second idea. thinking about doing that one myself now. I was orriginally just gonna get one of these:

http://cgi.ebay.com/ebaymotors/license-frame-chrome-with-the-turn-signals_W0QQitemZ4604990959QQcategoryZ35575QQrdZ1QQcmdZViewItem

[that_guy]

here you go.  Pics of mine.  The seat is just sitting there but you get the idea.







they were 16 bucks at cycle gear..

[annguyen1981]

I haven't even thought about putting them on the rear fairing, but now that I see it on like that, I'm liking the flush signals on the fender.

The LED's on the passanger pegs won't work on the GS.  The muffler is blocking the view on the right side.  I still have to do some thinking, so I'll let you know what my plans are...

Good job tho!   

[FearedGS500]

i love'em ! i just dont want to drill any holes in my rear faring .. or any thing

[FearedGS500]

ok where did you get them bad boys ? you got a link for me ? i'd let to get a set get them stock ones off   i'll probly put them on the bottom side if they look good and are visable   kinda like the GSX1000

[that_guy]

I got them at cyclegear.  I figured what the hell.  If I don't like them then I will take them off and use a little "bondo" and fill the holes and re-paint the plastics.  Flat black paint jobs are pretty reasy to come by..

[FearedGS500]

i'm guessing cyclegear is a shop there around your area ?

[that_guy]

yeah, cyclegear is a nationwide shop as well as online shop available worldwide.  http://www.cyclegear.com/

[budget speed demon]

I donno, I think those r6 pegs might work. does anyone have a pic of the back of their bike so you can see the peg mounts. my bikes in storage at someone ealses house so I dont have easy access to it

[Alphamazing]

There's a Cycle Gear here in Austin at 183/Burnet if you're ever in town. I think you could do a modification of the LEDs on the passenger peg brackets pretty easily. Get a strip of LEDs with some adhesive and put a few small strips right next to the tail light, covering up all that empty space back there.

[makenzie71]

Why not get an integrator?  I hate turn signals...especially flush mounts that aren't.  Or get bar-end signals...those are legal.

If you really want to run with the "flush mount" things get a aero marker light of some variety.  Autozone used to sell the ones I liked...stood mayby 1/4 off the surface, about 1/2" wide and about 2" long with the leading edge tapered to actually blend in.

[that_guy]

If you really want to run with the "flush mount" things get a aero marker light of some variety. Autozone used to sell the ones I liked...stood mayby 1/4 off the surface, about 1/2" wide and about 2" long with the leading edge tapered to actually blend in.

those things are huge..  mine are at most about 1" x 3/4" x 1/2" off the surface.

[makenzie71]

If you really want to run with the "flush mount" things get a aero marker light of some variety. Autozone used to sell the ones I liked...stood mayby 1/4 off the surface, about 1/2" wide and about 2" long with the leading edge tapered to actually blend in.

those things are huge..  mine are at most about 1" x 3/4" x 1/2" off the surface.

ummm...which makes them about 1/4" longer than the ones that I'm talking about, and about 1/4" higher off the surface.  your's are also about 1/2" wider.

[that_guy]

mine are only 1" long.  The ones you're referring to are for cars.  I used that have a set.. Trust me these are much smaller than anything available at autozone.  I just went there to try and buy some 2 days ago and decided to get these due to size.  But anyways.  Im happy with them so far.  They are very bright and due the job rather nicely..

[makenzie71]

I haven't looked in a while so I'm not sure where to find the real low-profile stuff anymore.  Texas doesn't require signal lights so I uually don't have any.

I misread your post...the ones I'm referring to are 2" X .5" X .25"...maybe a longer but still much smaller than what you've got (which looks like the typical lockhart phillips signals).  Owner preference trumps all other opinions, though.

[that_guy]

tru those are much lower profile.  i think we have to have them in FL.  iono..  i like them.  makes me feel safer.