News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

Rear brake squeels, just get new brake pad?

Started by tussey, February 22, 2006, 08:39:02 PM

Previous topic - Next topic

tussey

Rear brake squeels when I brake. Should I get new brake pad? Can I do the install my self or should I drop it off at the shop?

p.s. where can I purchase new brake pads? AutoZone, Advanced auto parts etc

acidbath

IF IT DON'T KILL YOU RIDE IT FASTER

94suzuki500

it is possible that you dont have an pad left, but it could also be possible that you have a pad that is dry and squeaky on the back side.  it vibrates when you apply the brake and will squeak.  Look at your pad and see if it is worn, if it isnt then remove it and put some type of de-squeak junk on the back.  I use 1207b its a suzuki marine sealant, just alittle layer will do it, reinstall and let dry and now now more squeak. 

94suzuki500

oh ya also if you pad is worn and needs replacing i dont think auto zone can replace it.  go to your dealer or order off the net, dealers are usually the same price and most of the time next day shipping.

scratch

The motorcycle is no longer the hobby, the skill has become the hobby.

Power does not compare to skill.  What good is power without the skill to use it?

QuoteOriginally posted by Wintermute on BayAreaRidersForum.com
good judgement trumps good skills every time.

Egaeus

Squealing is a sign of a lack of lubrication.  You should grease your rotors and pads thoroughly.

Seriously though, do what 94 said.  The anti-squeal goop often helps, but don't get it on your clothes.
Sorry, I won't answer motorcycle questions anymore.  I'm not f%$king friendly enough for this board.  Ask me at:
webchat.freequest.net
or
irc.freequest.net if you have an irc client
room: #gstwins
password: gs500


Egaeus

You can get both grease and anti-squeal goop at just about any auto parts store. 
Sorry, I won't answer motorcycle questions anymore.  I'm not f%$king friendly enough for this board.  Ask me at:
webchat.freequest.net
or
irc.freequest.net if you have an irc client
room: #gstwins
password: gs500

rangerbrown

had the same problem when i got my bike with only 1700 miles on it, looked as if the guy befor me had only used them and not the front. when i replaced them i used white grease on the sliders so they could move freely.  they still did it for like a 100 miles then stoped and never did it again, i guess they needs to be broken in like in a car.
nee down mother F***ers

calamari

my rear brake still squeals like a pig (since day 1 when I bought the bike), but one of these days I will take it back for warranty.

braking harder did not help.
Caturday yet?

Cal Amari

I've used a lot of different anti-squeal products over the years, and this is the product I prefer for stopping brake squeal due to vibration:

http://tinyurl.com/rwfd9

MANY autoparts stores carry it; NAPA, Pepboys, AutoBarn... CRC Disc Brake Quiet is an excellent product. The 4 OZ. bottle is resealable, and will last for years. You can use it on just about any disc brake pads (car, truck, motorcycle)... I use it every time I replace ANY pads, and highly recommend it. Just apply it to the BACK of the brake pad, where it will act as a damper for any noise-producing pad vibration. Of course, you could still get a squeal from greasy / contaminated brake pads, or a warped rotor, but you'd most likely feel a "pulsing" sensation when you applied the brake with a warped rotor, and the brakes wouldn't work too well if they had grease on them. Since you didn't mention those symptoms, my guess is that the noise is caused by the brake pad vibrating during braking, and the CRC Red Disc Brake Quiet should put a stop to the noise.

Be careful not to get any of it on the brake pads or rotor; I suspect it is red so you can see it easily. You'd know right away if you'd comtaminated any surfaces with it. Also, don't get it on your clothes... just another reason to wear coveralls or old clothes when you're wrenching... If you DO contaminate the pads or rotor with it, you can clean the surface with an actual brake cleaning product; do NOT use carb cleaner, electrical parts cleaners, or any other product not specifically designed for use on brakes.
This space for rent...

gsmetal

Cal Amari is right....most brake squeal is from vibratation and the most likely suspect is dirt or dust near the dust seals.

You can try an anti squeal on the back of the pads but it's by no means a sure thing.
"During Prohibition I survived on nothing but food and water." - W.C.Fields

Wrecent_Wryder

#12
3ds
"On hiatus" in reaction to out-of-control moderators, thread censorship and member bans, 7/31/07.
Your cure is worse than the disease.
Remember, no one HAS to contribute here.

tussey

Quote from: Wantabe_Wryder on February 23, 2006, 11:25:50 AM
FWIW, the anti-squeal stuff also comes in a spray, which I used for years "back when". Don't remember the brand (maybe Permatex?), but it was blue. I found it more convenient- easier and faster to get a thin, even layer.

No, there is no guarantee that there's not something else wrong, but it's also true that some brakes squeal sometimes, and some brakes squeal all the time, for no evident reason. You can disassemble, clean and check to your heart's content, and they'll still squeal. Very irritating. The goop does take care of those cases.



Yea so I got some Anti-Squeal stuff from AutoZone. It said not to spray it on the rotor but only the pads. Whatever. I sprayed a bit on the rotor, and slowoly rolled the bike with slight pressure on the rear wheel to spread the blue goop across the rotor. Now no more squeal  :thumb:

Wrecent_Wryder

#14
[d
"On hiatus" in reaction to out-of-control moderators, thread censorship and member bans, 7/31/07.
Your cure is worse than the disease.
Remember, no one HAS to contribute here.

Egaeus

Quote from: tussey on February 23, 2006, 03:03:47 PM
I sprayed a bit on the rotor, and slowoly rolled the bike with slight pressure on the rear wheel to spread the blue goop across the rotor.
You might want to follow the directions.  You also might want to go riding somewhere safe and ride the rear brake a bit to burn that crap off so you don't kill yourself trying to stop in an emergency.  I don't think you'll be able to wipe it off once it's cured.

By the way, that whole greasing down the rotor and brake pad comment was a joke.  I'm worried you might be taking me seriously....
Sorry, I won't answer motorcycle questions anymore.  I'm not f%$king friendly enough for this board.  Ask me at:
webchat.freequest.net
or
irc.freequest.net if you have an irc client
room: #gstwins
password: gs500

Wrecent_Wryder

#16
[fg
"On hiatus" in reaction to out-of-control moderators, thread censorship and member bans, 7/31/07.
Your cure is worse than the disease.
Remember, no one HAS to contribute here.

groff22

My '04 has been doing this for over a year, it is intermittant but the break still works fine. Kind of embarrasing when you're cruising with friends though.

Thanks for the information on the goop stuff, I'll surely go pick some up this weekend.  :bowdown:
04' GS500F

Wrecent_Wryder

#18
f3
"On hiatus" in reaction to out-of-control moderators, thread censorship and member bans, 7/31/07.
Your cure is worse than the disease.
Remember, no one HAS to contribute here.

manofthefield

I got the impression that he used something like this, not the anti-squeal that goes on the back of the pads.  Can you confirm this tussey?
motorcycleless
1998 GS500E sold 6/20/11

SMF spam blocked by CleanTalk