News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Flanges and wiley co - available again

Started by The Buddha, March 01, 2006, 03:40:09 PM

Previous topic - Next topic
Print
Go Down Pages 1 ... 4 5 6 7 8 ... 17
User actions

Wrecent_Wryder

#100
March 28, 2006, 03:13:38 AM Last Edit: August 17, 2007, 07:40:14 PM by Wrecent_Wryder
f3
"On hiatus" in reaction to out-of-control moderators, thread censorship and member bans, 7/31/07.
Your cure is worse than the disease.
Remember, no one HAS to contribute here.

The Buddha

#101
March 28, 2006, 05:15:10 AM
Wrecent - Man now you know how I feel ... I still dont have enough numbers, I am hoping there will be in a few days ... and I am making it no matter what ... I have like 3 times the trouble ... cos I got 3 more people to run after, I am counting you all as 1.
Average - Bars, OK I seem to have forgotten somehting - again ... PM me. I was gonna send you bars ??? I will once I make it. What I tell you ???
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

Wrecent_Wryder

#102
March 28, 2006, 07:53:48 AM Last Edit: August 17, 2007, 07:39:58 PM by Wrecent_Wryder
3f
"On hiatus" in reaction to out-of-control moderators, thread censorship and member bans, 7/31/07.
Your cure is worse than the disease.
Remember, no one HAS to contribute here.

The Buddha

#104
March 28, 2006, 09:01:39 AM
Last year too we were tap dancing around this till april or so, and boom I made and sent them out end of april. Good weather ... where ... we are still freezing and rainy and miserable ... in NC that is.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

The Buddha

#105
March 28, 2006, 09:26:25 AM
OK then, muffler guys will have it tomomorow morning.
Laser shop ... OK next item on my list ...  :thumb:
Order up kids, cos when they gone ... they are gone ... I wont make more, this time I mean it, unlike the last 3 times ...  O0 ...
But honestly anyway ... wileyco is there and flanges are there, so no better time to slap it all together.
And yea D&D will work, jetswing sent me last year and it was a slam dunk ... the inset part sorta looks weird, but fit it up and its peachy ... BTW you need a gasket with that thing, I dont have gasket in flange ... "Gasket not included" ...  :icon_mrgreen:
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

Wrecent_Wryder

#106
March 28, 2006, 11:33:51 AM Last Edit: August 17, 2007, 07:39:16 PM by Wrecent_Wryder
[4
"On hiatus" in reaction to out-of-control moderators, thread censorship and member bans, 7/31/07.
Your cure is worse than the disease.
Remember, no one HAS to contribute here.

The Buddha

#107
March 28, 2006, 01:47:50 PM
Its been riding weather all right, cos we gear up and ride, its not been working outside in the cold shop weather ... cos no way you can wear your gear to weld up sheite ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

average

#108
March 28, 2006, 10:21:45 PM
Quote from: seshadri_srinath on March 28, 2006, 05:15:10 AM
Wrecent - Man now you know how I feel ... I still dont have enough numbers, I am hoping there will be in a few days ... and I am making it no matter what ... I have like 3 times the trouble ... cos I got 3 more people to run after, I am counting you all as 1.
Average - Bars, OK I seem to have forgotten somehting - again ... PM me. I was gonna send you bars ??? I will once I make it. What I tell you ???
Cool.
Srinath.
Clip-ons? Ring a bell? ;)
R.I.P
Rich(Phadreus)
90 gs5 04 Fairings(that's right)
LP flushmounts up front  shortened turn signals
Kanatuna rear wheel swap
Kat FE

toobrie

#109
March 28, 2006, 11:11:46 PM
i purchased one of the D&D off ebay and have been trying to figure out a way for a gasket.  I was looking through one of my auto parts catalogs and noticed that mr. gasket sell a flat uncut sheet of exhaust gasket material.  I was thinking of getting a sheet and making a stencil off the bottom of the muffler and cutting it to size.  It comes in sheets of 10x10 or 6x24.  I think that this should create a really good seal between the bolt-on muffler and the flange.
05 Gs500F Blue.  Flush Mount Side Markers (Front & Back) / Srinath Bars / Carbon bar ends / Replaced Grips / Custom Windscreen / Custom Chain Guard

joedude

#110
March 28, 2006, 11:23:47 PM
I suppose a can of Hi temp Loctite instant gasket, or any other type of High temp RTV would work fine...eh? :dunno_white:
FTHRWYFL - Forget the Hype, Ride What You F@$#%&n Like!

1996 GS500, Red, w/ Fenderectomy, Complete LED Dash, K&N lunchbox, Rejet
Mods to be installed: Wileyco Slip-on, and Headlight Fairing

The Buddha

#111
March 29, 2006, 02:38:59 PM
Quote from: average on March 28, 2006, 10:21:45 PM
Quote from: seshadri_srinath on March 28, 2006, 05:15:10 AM
<snip>
Clip-ons? Ring a bell? ;)

OK yes I sold you some shitty clip on's ... now yes I said refund of that ... OK was that what you talking about ???
What bars did you want then ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

average

#112
March 29, 2006, 10:20:37 PM
Which ever ones are the best. Will iron out the details in pm O0
R.I.P
Rich(Phadreus)
90 gs5 04 Fairings(that's right)
LP flushmounts up front  shortened turn signals
Kanatuna rear wheel swap
Kat FE

Dwn4whadever

#113
March 29, 2006, 11:48:28 PM
I know this is stupid but.... What is the flange? and what does it do?
A common mistake that people make when trying to design something completely foolproof, is to underestimate the ingenuity of complete fools....

Thanks to advances in automation, Nike shoes will be made by robots. Unfortunately, the robots will be made by children in Malaysia.

average

#114
March 30, 2006, 12:26:06 AM
 :laugh: :laugh: its custom midpipe designed by seshadri to slip fit onto your existing headers so that you can run a slipon pipe.
R.I.P
Rich(Phadreus)
90 gs5 04 Fairings(that's right)
LP flushmounts up front  shortened turn signals
Kanatuna rear wheel swap
Kat FE

Dwn4whadever

#115
March 30, 2006, 01:19:52 AM
My friend gave me a VH SS2R, i didnt know i need one of these things to put the exhaust on. shaZam!  :mad:
A common mistake that people make when trying to design something completely foolproof, is to underestimate the ingenuity of complete fools....

Thanks to advances in automation, Nike shoes will be made by robots. Unfortunately, the robots will be made by children in Malaysia.

The Buddha

#116
March 30, 2006, 08:51:49 AM
What ... show me a pic ... It may not need a flange. I am making these to fit a bolt on can like a slip on ... not neccesarily slip on to the bike ... whatever ... show me pic ... I'll clear it up.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

blue05twin

#117
March 30, 2006, 09:17:59 AM
For a gastket I went to autozone and bought a sheet of header gasket material for $5.00.  Cut it to fit the flange.  Works perfect.
Pilot 22.5, Mid 65 , Mains 147.5, Mixture screw 3.5 turns out

Even if the voices aren't real they have some good ideas.

Dwn4whadever

#118
March 30, 2006, 03:01:49 PM Last Edit: March 30, 2006, 03:03:10 PM by dwn4whadever
Quote from: seshadri_srinath on March 30, 2006, 08:51:49 AM
What ... show me a pic ... It may not need a flange. I am making these to fit a bolt on can like a slip on ... not neccesarily slip on to the bike ... whatever ... show me pic ... I'll clear it up.
Cool.
Srinath.



Here is the link i posted pics a little bit back...http://gstwins.com/gsboard/index.php?topic=24952.msg257070#msg257070

If you need better ones just tell me and i will post somemore when i get home.
A common mistake that people make when trying to design something completely foolproof, is to underestimate the ingenuity of complete fools....

Thanks to advances in automation, Nike shoes will be made by robots. Unfortunately, the robots will be made by children in Malaysia.

The Buddha

#119
April 04, 2006, 06:44:06 AM
I am waiting on laser shop. I believe I threw a curve ball his way by putting in an oval shaped hole so I can bend up the can more ... yea people ... its getting to a high exit, burn your turn signal and rear fender exit ... and yea burn your passenger's ass too ...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------
Print
Go Up Pages 1 ... 4 5 6 7 8 ... 17
User actions
SMF spam blocked by CleanTalk