Flanges and wiley co - available again

[blue05twin]

any automotive store ie autozone has high heat spray paint that you can use to paint the flange.  even home depot carries a high heat paint. 

[crezydave]

so no welding is required?

would i be able to do this on my own in my garage?

[blue05twin]

No welding is required.  But you will lose the stopper for  the center stand many work arounds for that too.
Look here
http://gstwins.com/gsboard/index.php?topic=18946.0

http://gstwins.com/gsboard/index.php?topic=20826.0

Theres more if you search center stand, center or stand

[Wrecent_Wryder]

[f

[average]

  lose the stop,not the stand.

[blue05twin]

Also the right passanger foot peg needs to be relocated.








J/K  nothing else thats it

[The Buddha]

I've heard the opposite sentiments more than once, and here- people would rather inherit stock, un-messed-with bikes, than bikes even with the mods they'd do themselves. With a modded bike, you never know the quality of wrenching that's gone before. I felt that way myself when I was buying.

I too heard the opposite comment, till someone decided to take me up on the offer to ride the bike with stock pipes. Wouldn't you know it, I had one sitting right under my thumb ... they rode it. And they came back and paid me the money and took the loud bike away. Trust me if someone says it not good that its loud, they should try out the alternative. Of course it would halp if the pipe cost ya $100 or so instead of $500 - 1000 that many sport bikes have ...
Cool.
Srinath.

[Wrecent_Wryder]

fd

[toobrie]

Im down for one with a choker in it.  Let me know when to pay and I'll get the money to ya.

[The Buddha]

Slow down kids ... These have hit a design snag ... but rest assured I will figure out and fix it ... so no need to scramble up the $$ and rush it over here just yet ... Those that sent it, OK I'll sit on it till I send out anyway ...
Now To work on the carbs that seem to be cropping up every 2 inches in my house ... Hope they get done and out in a day or 2, and then we attack the flange problem and hopefully it all happens with no further problem.
Cool.
Srinath.

[Wrecent_Wryder]

3c

[nmred]

bump

[The Buddha]

OK worked the design out, its with laser guys ... BTW I dont have any where near 20 ... more like 5 at this point. So order up, I cant make 5 ... you guys know that. So order up and get a co - op going to the wileyco and get them for a deal from the guy and we'll be great.
Cool.
Srinath.

[ImJustPondering]

Come on people - buy some! I wanna change out my muffler asap   

[melloGS]

count me in! PM me details please

[Wrecent_Wryder]

[3

[nmred]

I'll send out the $40 plus shipping as soon as I know what the shipping is. I am in 87110.

Thanks again man.

[natedawg120]

hey Srinath,

Wondering if you have any of the two welds lieing around?  It has been a bad two months for handle bars and i really don't want to break the bank again for another set.

[The Buddha]

Nope ... heck some SV guys showed up and bought a couple of defective ones ... Like I cant make any bad ones ... OK they were OK just a bit short for my liking. They didn't care ...
But I'll get these done and do 2 welds, and 4 too in fact.
Just need to get these flanges cranked out and should be good, I know the bars ... usually that aspect goes down smooth.
Cool.
Srinath.

[jnande4176]

Hey guys,

I just sent a message to the seller of the Wileyco exhaust cans saying that 10-15 people are interested in buying exhaust cans from him and were wondering if we placed one large order of 10-15 mufflers, if we could get a high volume discount. Hope to hear from him soon, and as soon as I do, I will let you guys know what he says.

J Anderson