Flanges and wiley co - available again

bbanjo · April 12, 2006, 05:05:22 PM

Quote from: samhkang on April 11, 2006, 09:14:34 PM
Quote from: snap on April 05, 2006, 12:05:48 PM
Quote from: samhkang on April 05, 2006, 11:29:46 AM
Thanks for the answers guys. I just ordered SUZUKI GSX 1200 WILEYCO STAINLESS from the guy on ebay for $85+15 for shipping.

I ordered the same exhuast but in carbon for $100 + $15 shipping from that guy. it came in yesterday and it is soooo beautiful.

Hey snap, does yours have four balts? I received mine today that is for GSX 1200 (stainless) and it has four holes for the bolts. Did I get the wrong one for srinath's flange? Hey srinath, would it work?
It also came with a flange which has four holes also...... Please help....
The muffler looks beautiful though. not sure about the T-shirt and the hat.

I got the CF one for the GSX1200 in the mail today

and mine is a three bolter. Hat, keychain and shirt (two sticker and a pin, just found them) to boot. Which reminds me.....laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop!

Dave3sv · April 12, 2006, 05:54:27 PM

Hello, no the stainless steels are a 4 bolt pattern. The carbon exhaust has a 3 bolt pattern. Thank you.

This is what the seller said after I asked if he could verify that it was a 3 bolt pattern. Why would stainless be 4 bolt while carbon is 3?

bbanjo · April 12, 2006, 05:55:46 PM

Quote from: seshadri_srinath on April 11, 2006, 07:41:27 AM
Ok its not in wait and see if it gets made mode ... its waiting on people to make the stuff and then I get welding mode ... I may have said OK send money, but I wont cash anythign till you have it. And its definetly getting made and in the near future.
Cool.
Srinath.

Yay.

I'm ready eddy eddy eddy. Just tell me when it's cool to send the loot.

joedude · April 12, 2006, 06:14:05 PM

Quote from: bbanjo on April 12, 2006, 05:05:22 PM
Quote from: samhkang on April 11, 2006, 09:14:34 PM
Quote from: snap on April 05, 2006, 12:05:48 PM
Quote from: samhkang on April 05, 2006, 11:29:46 AM
Thanks for the answers guys. I just ordered SUZUKI GSX 1200 WILEYCO STAINLESS from the guy on ebay for $85+15 for shipping.

I ordered the same exhuast but in carbon for $100 + $15 shipping from that guy. it came in yesterday and it is soooo beautiful.

Hey snap, does yours have four balts? I received mine today that is for GSX 1200 (stainless) and it has four holes for the bolts. Did I get the wrong one for srinath's flange? Hey srinath, would it work?
It also came with a flange which has four holes also...... Please help....
The muffler looks beautiful though. not sure about the T-shirt and the hat.

I got the CF one for the GSX1200 in the mail today and mine is a three bolter. Hat, keychain and shirt (two sticker and a pin, just found them) to boot. Which reminds me.....laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop, laser shop!

I should be getting mine in the mail sometime soon, probably this week. I ordered the Stainless one... I hope it's 3 bolt...

Seshadri: If my can is also a 4 bold pattern, and if as samhkank says (they come with a proper flange), would it be possible to mail the flange to you to have it welded to the pipe?

Too bad we didn't know about the flanges coming with the cans before eh Seshadri?... would have saved lots of time with having to make them

samhkang · April 12, 2006, 10:33:56 PM

okay, updates on the issues of the guys sending me the four bolt vs.

three bolt can.
This is what he wrote me :
"Hello, I found out what the difference is. The carbons are for the GSX 1200F. The stainless steels are for just the 1200's. Please provide an address where we can schedule a UPS pickup. Once confirmed we can ship out the carbon. Thank you"
I also phoned him and he said it was his fault that there was a typeO. He was real nice over the phone and is willing to exchange it for the right one.
bbanjo, if you get the wrong one, just write him back or phone him. He will take care of ya.
I can wait, the srinath's flange is not ready yet anyway.

bbanjo · April 13, 2006, 07:15:52 PM

Quote from: samhkang on April 12, 2006, 10:33:56 PM
okay, updates on the issues of the guys sending me the four bolt vs. three bolt can.
This is what he wrote me :
"Hello, I found out what the difference is. The carbons are for the GSX 1200F. The stainless steels are for just the 1200's. Please provide an address where we can schedule a UPS pickup. Once confirmed we can ship out the carbon. Thank you"
I also phoned him and he said it was his fault that there was a typeO. He was real nice over the phone and is willing to exchange it for the right one.
bbanjo, if you get the wrong one, just write him back or phone him. He will take care of ya.
I can wait, the srinath's flange is not ready yet anyway.

I'm cool. Thanks for the heads-up but mine has three (I can see myself waking up in a panic at 4 AM and running down to count the bolts tonight

).

bbanjo · April 18, 2006, 12:48:48 PM

Not to be a pita, but I'm ready to cut the shite out of my stock pipe and just jam this sweet looking CF WileyCo on there. Any update on the flanges there Srinath? I have the patience of any one of my 6 and under kids.

Wrecent_Wryder · April 18, 2006, 05:25:03 PM

4d

bbanjo · April 18, 2006, 08:00:54 PM

Quote from: Wrecent_Wryder on April 18, 2006, 05:25:03 PM

Geez, dood... Ok, he posted the message with the word "available" in the subject line on March 1st, maybe that was a little premature, but it hasn't even been two months since then... be reasonable!

I gotcha dude, he can handle the heat

joedude · April 25, 2006, 08:38:38 PM

Got my Wileyco Stainless Steel ZX7R can in the mail today! and she's a beauty

and I'm happy to say that it has the 3 bolt pattern, and measured from bolt to bolt... is 80mm. But for some reason, mine didn't come with a flange

. I know that I don't need one since it already comes welded to Srinath's pipe... but I paid for the whole kit

I also don't think that Wileyco sticker will be adhering to the can for very long... it seems poorly glued and almost half way off... but oh well, I'm sure I can find some high heat adhesive somehwere to more permanently stick it on there.

Any updates on those Flanges Srinath?

average · April 25, 2006, 09:52:06 PM

Unless you ordered the pipe AND flange from srinath, then it came with what it was suppose to come with: Pipe,hat,hanger,bolts,cheesy gasket, possibly hat,t shirt, and pin.
You'll have to wait until he sends out the flanges,big guy.

joedude · April 25, 2006, 10:12:30 PM

Ummm... I havn't received anything from Srinath... cause as far as I know he hasn't shipped anything to anyone. And last time I've checked he didn't sell exhaust cans either... I purchased the can on eBay and ordered a Srinath flange (which is welded to a short lenght of exhaust pipe).

average · April 25, 2006, 10:15:11 PM

i know,bud. I have mine

But, i must have misunderstood you. Give him some time and he'll get em out shortly

samhkang · April 25, 2006, 10:15:52 PM

Quote from: joedude on April 25, 2006, 08:38:38 PM
Got my Wileyco Stainless Steel ZX7R can in the mail today! and she's a beauty
and I'm happy to say that it has the 3 bolt pattern, and measured from bolt to bolt... is 80mm.

Ha ha, I just got mine today too. The guy on ebay finally sent me the right one (carbon with 3 bolt pattern and flange). I wish I could have kept the stainless steel one but the four bolt pattern just wouldn't work for srinath's flange. The carbon one kinda looks cool too anyway.

average · April 25, 2006, 10:17:27 PM

Wait, what flanges are you guys talking about? Are some of these wileyco's actually coming with the flange for the bike that they were meant for?

samhkang · April 25, 2006, 10:41:46 PM

Quote from: average on April 25, 2006, 10:17:27 PM
Wait, what flanges are you guys talking about? Are some of these wileyco's actually coming with the flange for the bike that they were meant for?

yes, yours didn't?

average · April 25, 2006, 10:45:25 PM

no, and then again i bought my pipe last year. I dont even remember what bike it was entended(sp) for.

average · April 25, 2006, 10:47:01 PM

Since you already have flanges, why dont you guys try using what you have. Are the flanges that you have no long enough or too short or what?

joedude · April 25, 2006, 10:50:25 PM

ya that's what I was saying, the wileyco package is SUPPOSED to contain a flange. It's no big deal that mine (or yours) didn't contain one, but when you're paying for a 'brand new unopened box' you kinda want all contents.

The big difference I guess is that Srinath's flange comes with a length of pipe welded to it that just slides over and clamps to the existing exhaust pipe. Whereas the Flange that comes with the Wileyco exhaust is just the flange alone and obligates you to use the whole lenght of your stock exhaust.

joedude · April 25, 2006, 10:53:40 PM

Quote from: average on April 25, 2006, 10:47:01 PM
Since you already have flanges, why dont you guys try using what you have. Are the flanges that you have no long enough or too short or what?

The flange has to be somehow attached to the exhaust pipe coming out of the exhaust header... it's not about it being long or short... it has no real lenght... it is just a flange... kinda like a washer with holes I guess.

What Srinath makes is a 'Flange with a length of pipe' - for lack of better terms. He just calls it a Flange (don't know why)

News:

Flanges and wiley co - available again