News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

low idle

Started by william.betts, May 26, 2006, 08:41:34 PM

Previous topic - Next topic

william.betts

hey guys i have a problem i was wondering would cause my bike to idle under 1000 it seems no matter what i do i can not get to idle above 1000 it will not die buy it idles really low thanks

blue05twin

You probally did this but I'll ask anyway.  Did you warm up your bike for at least 10 min before adjusting the idle screw?
Pilot 22.5, Mid 65 , Mains 147.5, Mixture screw 3.5 turns out

Even if the voices aren't real they have some good ideas.

william.betts

i have cleaned the carbs the air/fuel screw is out 2 1/2 turns new plugs kinda of baffled on this one floats are set

ajgs500

ok now try the IDLE SCREW

Phaedrus

Like previously posted, did you warmt he bike up for a good 10 minutes before adjusting the idle screw?
Richard died in a motorcycle accident that was at no fault of his own.  We lost a good friend and good member of this board.  Though Rich may be gone, his legacy will live on here.

Photos from the June '06 Northeast GStwin Meet

Kerry

The implication is that willam.betts adjusted the idle down to 1,000 RPM.  If that's true, then he could have solved the problem before asking the question.  :dunno_white:

On my ('99) bike the idle goes up as the engine gets hotter, and I have to adjust it down.  The only exception is when I accidentally pull the choke on a little while going down the road, especially in hot weather.  In that situation the bike tends to die when I come to a stop, and it's hard to start until I notice the choke and turn it fully OFF.
Yellow 1999 GS500E
Kerry's Suzuki GS500 Page

ajgs500

Quote from: william.betts on May 26, 2006, 09:05:13 PM
i have cleaned the carbs the air/fuel screw is out 2 1/2 turns new plugs kinda of baffled on this one floats are set

Personally I think he did all of the above mentioned and forgot to adjust the idle screw....

william.betts

no i think i found the problem the sprint that move the butterfly valve on the the 2nd carb is missing

SMF spam blocked by CleanTalk