Where the F%^ do you buy a #4 washer?

[Grainbelt]

After my carb rebuild and float height fix, the bike is really lean thru idle and has a pronounced dead spot at 6k.  Plan to take the carbs off, richen up the air/fuel screws, and shim the needles. Therein lies the problem.

me: 'looking for a really small washer, #4'
home depot, rona, local hardware store, local everything store: '#8 is as small as we carry.'

Where did y'all buy a #4 washer?

[dgyver]

I got mine at Ace/True Value, along with most of my metric fasteners. I have bought small brass copper washers (a little thinner) at another store. There were in those small bags but do not recall what store.

[Egaeus]

Fastenal.  Barring that, if you don't find one, I will be home next week and can send you a set. 

[KYGS500E]

got mine at lowes.... it took forever to find it though... even with the guys' help

[corndog67]

Orchard Supply, McMaster Carr, Grainger, Fastenal, any of the industrial suppliers, but you have to buy a box of 100, and nobody's bike is that lean. 

[TheGoodGuy]

turns out the big home stores dotn have jack i had to go to a small place called virgils to get mine.. but ace truevalue has it too..
or check with RC shops.

[Grainbelt]

Thx guys. I'll check with the maintenance guys on-site here and see who the buy from, there has to be some canadian industrial supplier around.

rant over, for now. 

[Chris2P]

PM me your address.  I'll send you some for free.

Chris