Jardine Installed

gsjohn · June 27, 2006, 03:52:16 PM

I finally got my exhaust ordered on 4/29. I installed today, i am pretty satisfied with it. You have to be careful when installing though or u will hit the brake caliper. About an hour to install, Looks sweet and sounds good. I dont have a camera sorry.

leo · June 27, 2006, 03:55:03 PM

Nice.

rangerbrown · June 27, 2006, 04:17:04 PM

what jets did you use, we must know

gsjohn · June 27, 2006, 05:04:48 PM

dynojet kit 3156.001

scottpA_GS · June 27, 2006, 05:10:44 PM

Does it have the center stand stopper? I had to grind mine off the stocker and weld it to the V&H

gsjohn · June 27, 2006, 05:34:10 PM

yes it does have the stop for the center stand. You have to use the rubber off yours though.

rangerbrown · June 27, 2006, 05:34:58 PM

how hoes the power feel.

annguyen1981 · June 27, 2006, 05:47:09 PM

Pics?

rangerbrown · June 27, 2006, 06:01:41 PM

Quote from: annguyen1981 on June 27, 2006, 05:47:09 PM
Pics?

Quote from: gsjohn on June 27, 2006, 03:52:16 PM
I dont have a camera sorry.

annguyen1981 · June 27, 2006, 06:04:46 PM

OOPS..

Sorry... I should really turn the damn TV off when posting...

Lukewarm Wilson · June 27, 2006, 06:24:50 PM

Just ordered mine today it will take about a week or so to get here but any info you can give will be appreciated also how and why was it almost hitting the rear caliper?

gsjohn · June 28, 2006, 03:31:13 AM

power increase is noticable i am not a dyno though. It was hitting the rear caliper because the clamp the give to mount the can is just a ss band. To avoid the problem mount header, then mount can to mid pipe. line up , tighten up midpipe clamp and header bolts, then install the muffler clamp.

Wrecent_Wryder · June 28, 2006, 04:43:25 PM

g6

rangerbrown · June 28, 2006, 06:17:09 PM

should work fine with the pre 04, but any one else know for sure?

Lukewarm Wilson · June 29, 2006, 12:39:47 AM

Quote from: Wrecent_Wryder on June 28, 2006, 04:43:25 PM
Anybody with a pre-'04 got one yet, or on order?

__________________________________________________________________________________
Yeah me, for an 03 model mines on order should be here next week. I spoke to a tech at suzuki australia he said if it fits a later model it will fit the earlier models as well which I already knew but I just wanted some reassurance

Wrecent_Wryder · June 29, 2006, 02:56:21 AM

[j

galahs · June 29, 2006, 07:48:26 AM

Te first faired model in Australia was the 04.

nick_villan · June 29, 2006, 01:58:01 PM

hey were did u get ur exhaust from?

Lukewarm Wilson · June 29, 2006, 03:31:50 PM

Quote from: Wrecent_Wryder on June 29, 2006, 02:56:21 AM
Quote from: Lukewarm Wilson on June 29, 2006, 12:39:47 AM
Quote from: Wrecent_Wryder on June 28, 2006, 04:43:25 PM
Anybody with a pre-'04 got one yet, or on order?

__________________________________________________________________________________
Yeah me, for an 03 model mines on order should be here next week. I spoke to a tech at suzuki australia he said if it fits a later model it will fit the earlier models as well which I already knew but I just wanted some reassurance

Forgive my ignorance, but we didn't have an '03 model over here- is it naked without the oil cooler, or faired with one?

Thanks.

Naked, no oil cooler

I'm getting the exhaust system from this company http://starcycle.com/ they had it listed on Ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180000833675
I noticed they have one on the canadian ebay site as well, they tell me it will be here next week fingers crossed

News:

Jardine Installed