Finally installed Jardine with bigger pictures just added

Started by Lukewarm Wilson, July 09, 2006, 03:39:19 PM

Previous topic - Next topic

annguyen1981

So is this kit compatible with slipons?  It looks like it from the pics.

If so, I might wanna try and contact the manufacturer and have them sell me just the midpipe and headers.

2007 YZF-R6 - Purchased 7/03/07
2004 YZF-R6 - Stolen 5/25/07
2004 GS500f - Sold to Bluelespaul
Killin' a Kitty

Lukewarm Wilson

any spring loaded slip on would do provided the hole diameter is the same but as the muffler is straight through with just defusser in it I couldn't imagine any other slip ons would flow any better unless your looking for a carbon fibre slip on :dunno_white: :thumb: :cheers:
Experience enables you to recognise a mistake when you make it again


Budrick320

05 GS500F: the Black/Grey/Red one
Official LVN as of 1/26/07! Yeah Baby!

Sakuraba

I have an 06 and i defanitly wanna put this on my bike. Problem is, i have NO mechanical experience. Is there a step by step tutorial for this mod? Im assuming i need to rejet while using this system, ill just order a dynojet kit. That come with a K&N filter doesnt it?

Lukewarm Wilson

Quote from: galahs on July 10, 2006, 09:37:35 AM
does this system leave you room to do an oil change without removing the system?

_________________________________________________________________________________
yep no problem everything is as it was :thumb: :cheers:
Experience enables you to recognise a mistake when you make it again

Lukewarm Wilson

Quote from: Sakuraba on July 10, 2006, 02:49:52 PM
I have an 06 and i defanitly wanna put this on my bike. Problem is, i have NO mechanical experience. Is there a step by step tutorial for this mod? Im assuming i need to rejet while using this system, ill just order a dynojet kit. That come with a K&N filter doesnt it?

___________________________________________________________________________________________________________
If you look at the original pics you will see the bolts that need to be removed 5 bolts and 1 nut its as easy a mod to do as just about any other mod the only problems are the header bolts and centrestand rubber mount if you refer to an earlier reply in this post you will see what I mean other then those its a good mod to do to give yourself confidence to work on your bike but you will need to rejet, best leave that to someone in the know if your not confident about it also the jets don't come with the filter that is a seperate kit to buy theres also a link to the one i bought (exhaust) from ebay :thumb: :cheers:
Experience enables you to recognise a mistake when you make it again

Sakuraba


SMF spam blocked by CleanTalk