News:

Protect your dainty digits. Get a good pair of riding gloves cheap Right Here

Main Menu

what is the part number for an adjustable needle from sudco

Started by deathlucky, September 01, 2006, 05:08:09 AM

Previous topic - Next topic

deathlucky

hi
im planing on doing a rejet and i would like to know what is the part number from sudco for a adjustable needle to fit a gs500f 2006

i am thinking
20 pilot #004-564
62.5 mid #004-270
135 main #004-299

also what clips and shims will i need for the rejet and the new needle
GS500F 2006
K&N Air Filter
Michelin Pilot Activ
SS Front Brake Line
Progressive Front

The Buddha

We put washers under it. No one makes adjustables outside of Kits.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

LimaXray

Don't worry about the needles, with the addition of the mid-mains there's no need, the mid-mains tune the midrange in the same manor shimming the needles would, so why bother adjusting it in 2 places
'05 GS500 : RU-2970 Lunchbox : V&H Exhaust : 20/65/145 : 15T : LED Dash : Sonic Springs : Braided Front Brake Line : E conversion with Buell Dual Headlight : SW-Motech Engine Gaurds ...

The Buddha

OK but washers are cheaper and much more easier to find than the damn mid mains ...  O0 ... heck i know of someone who washered the bike (ok it had nuts) to the point of not needing a jet size upgrade. Yea ... but you can end up with a over needle that comes out the emulsion tube.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

SMF spam blocked by CleanTalk