News:

Registration Issues: email manjul.bose at gmail for support - seems there is a issue that we're still trying to fix

Main Menu

Bar End Mirror Recommendations

Started by Chilly Willy, September 10, 2006, 11:28:28 AM

Previous topic - Next topic

Chilly Willy

Hi all,

I switched from summer mesh to fall textile recently.  My new (to me) Joe Rocket Ballistic jacket adds quite a bit of width to my already wide shoulders.  As a result, I can't see out of my rear-view mirrors.  I've looked around, and the stock mirrors are perhaps some of the more generous mirrors I've seen in awhile.  In short, I think that bar-ends are my only solution.

So, I know this is an old topic (and I have read through the past threads), but I'm looking for recommendations for a really good set of bar-end mirrors.  I hate the look of the Napoleons (no offense to those who love them), so I'm looking more at the round / oval ones.

As a cyclist, I know that cheap bar ends can vibrate around to the point of being useless.  Therefore, I'm hoping to find something sturdy and vibration resistant.

Your recommendations would be much appreciated.

El Noobo
94 GS500, Instrument LEDs and Speedo/Tach LEDs, Gel Seat, Kisan Headlight Modulator, Tail Light LEDs, Kat 6 rear shock, Plexi 3 Fairing, SW Motech Case Guards, SV Mirrors

Alphamazing

CRG bar end mirrors are probably what you want. However, they come with a price (a high one).
'05 DR-Z400SM (For Sale)
'04 GS500E (Sold)

Holy crap it's the Wiki!
http://wiki.gstwins.com/

morbidelli17

Bicycle shop. I spent $12.99 each for mine, and they work just fine ...

Chilly Willy

Quote from: morbidelli17 on September 10, 2006, 12:37:36 PM
Bicycle shop. I spent $12.99 each for mine, and they work just fine ...

I have an extra set of Mirrcycles (or however you spell it) bar-ends from my recumbent bike that I've thrown on my motorcycle.  I'm going for a long ride today, so I'll be able to test them out on the road.

I recently put in some heavy, vibration dampening bar ends that I just love.  I would like to be able to find some bar-end mirrors that somehow encorporate a vibration dampener.

Any leads? :dunno_white:

Thanks,

El Noobo
94 GS500, Instrument LEDs and Speedo/Tach LEDs, Gel Seat, Kisan Headlight Modulator, Tail Light LEDs, Kat 6 rear shock, Plexi 3 Fairing, SW Motech Case Guards, SV Mirrors

sanjay

It's difficult to use bicycle mirrors without vibration issues.  Your best bet is the CRG, like Alpha said, but he's right about the price (cheapest are $44 each). 

Also check http://cgi.stanford.edu/~sanjayd/gs500/Upgrades/Mirrors
'92 GS500.  Sold.
'01 GS500.  Sold.  SM2s.  Progressives (15W).  Woodcraft Rearsets.  K&N Lunchbox.  Yoshi TRS slip-on.  CRG bar-end mirrors.  Pirelli Sport Demons.  Billet Fork Brace.
'07 Monster 695.

GS500 Wiki:  http://wiki.gstwins.com

Wrecent_Wryder

#5
[53
"On hiatus" in reaction to out-of-control moderators, thread censorship and member bans, 7/31/07.
Your cure is worse than the disease.
Remember, no one HAS to contribute here.

Chilly Willy

Yeah,

The bicycle mirrors were buzzing around pretty badly--I could still see behind me, but it was blurry.

Where can I get those mirrors for $44?  A link would be appreciated--thanks!

When not on the GS500, I ride a Sun Sport AX--an upright, LWB recumbent.

El Noobo
94 GS500, Instrument LEDs and Speedo/Tach LEDs, Gel Seat, Kisan Headlight Modulator, Tail Light LEDs, Kat 6 rear shock, Plexi 3 Fairing, SW Motech Case Guards, SV Mirrors

Chilly Willy

Anyone have any experience with these CRG knock-offs I've found on e-bay?  They look like they're made with the same materials as the CRGs, but you get two mirrors for less than the price of one CRG:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=320027494954&ih=011&sspagename=STRK%3AMEWA%3AIT

El Noobo
94 GS500, Instrument LEDs and Speedo/Tach LEDs, Gel Seat, Kisan Headlight Modulator, Tail Light LEDs, Kat 6 rear shock, Plexi 3 Fairing, SW Motech Case Guards, SV Mirrors

SMF spam blocked by CleanTalk