News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Mirror with a mind of its own...

Started by jazerr, September 18, 2006, 10:28:00 AM

Previous topic - Next topic

jazerr

Yesterday I got on my bike, went through the routine of checking everything, make sure its all there and whatnot...my mirror is pointed wrong. So I fix it (figured I bumped it).

But, its the wind. The wind is moving my mirror inward so I have a great view of my chest. Is there anything I can do without having to buy a new one?
::: '01 E ::: Lunchbox ::: Salami Sandwich ::: Broussard's Ignition Advancer ::: 20/62.5/142.5/2w/3 ::: Progressives w/1" spacers ::: homemade fenderectomy ::: F-16 tour shield w/a nice rash ::: One crash :::

GSTwin Shirts.

RVertigo

Do you have an F or a naked?


And what part is moving?  The whole stem or just the top mirror part?

scratch

He has a 2001: http://gstwins.com/gsboard/index.php?topic=28523.msg306415#msg306415

If it's the black plastic mirror, superglue the stem-to-ball-joint in place overnight; it's not adjustable after that, but at least it wont move.
The motorcycle is no longer the hobby, the skill has become the hobby.

Power does not compare to skill.  What good is power without the skill to use it?

QuoteOriginally posted by Wintermute on BayAreaRidersForum.com
good judgement trumps good skills every time.

natedawg120

Grow boobs :laugh: :laugh: :laugh:

Ok all sarcasm aside try the super glue trick.  I have seen a buddy of mine that rode an old CB550 that had the same problem and he did that and it worked.  He also duck taped a lot on that bike, including the exhaust  :laugh: :laugh: :laugh:
Bikeless in RVA

flyingbeagle71

Just an idea, but could you put some dust into the ball joint?  Might make things not so smooth...
GS500F in BLUE because that's the COOLEST color!

RVertigo

The '01 has the chrome mirrors...

My suggestion:  Get some 2nd Gen SV mirrors...  You can tighten those once you've adjusted them.   :thumb:

Kasumi

Quote from: natedawg120 on September 18, 2006, 12:55:14 PM
Grow boobs :laugh: :laugh: :laugh:

Ok all sarcasm aside try the super glue trick.  I have seen a buddy of mine that rode an old CB550 that had the same problem and he did that and it worked.  He also duck taped a lot on that bike, including the exhaust  :laugh: :laugh: :laugh:

Was working down a farm last night doing some contract rolling and this farm is right on the outskirts of a big town so thus its a tip, burnt out cars the works. Anyways they have this ancient loadall and the ENTIRE steering column is duck taped together, i mean its broken away from the floor, its broken in half - the dash board even hangs loosly by its wires and the whole thing is only been held in place by the steering wheel tubey bit plus the tape, the gaffa got in there to move it out the way and it started falling apart so we just towed it lol, piece of rubbish but that duck tape prolly gave it an extra few months! good stuff.
Custom Kawasaki ZXR 400

Chilly Willy

Quote from: Arvy on September 18, 2006, 01:43:39 PM
The '01 has the chrome mirrors...

My suggestion:  Get some 2nd Gen SV mirrors...  You can tighten those once you've adjusted them.   :thumb:

Where do you get these mirrors?

El Noobo
94 GS500, Instrument LEDs and Speedo/Tach LEDs, Gel Seat, Kisan Headlight Modulator, Tail Light LEDs, Kat 6 rear shock, Plexi 3 Fairing, SW Motech Case Guards, SV Mirrors

RVertigo

svrider.com
ebay.com
craigslist.org

Or you can overpay and order Suzi OEMs.

SMF spam blocked by CleanTalk