Bent Valve's HELP!

[motorgroove]

Hi all, I bough a project GS500 and found out the valves are bent for one of the cylinders. How hard of a project would it be to get the head fixed and replaced? Anyone in SoCal have any recommended machinists or could offer any assistance, i would really appreciate it 

[gsJack]

I did my own.   

[D-Day]

Hi all, I bough a project GS500 and found out the valves are bent for one of the cylinders. How hard of a project would it be to get the head fixed and replaced? Anyone in SoCal have any recommended machinists or could offer any assistance, i would really appreciate it 

A valve job should cost around $150, plus about $20 per  bent valve (correct me if I am wrong on the valve price)

[Jughead]

I'm going to be Parting the Motor out on my 89.It may take a few days to get everything apart..I'm sure the top end is in great Shape since it was running Like a Sewing machine.Weel except for tht knock in the Bottom End. 5,500 Original Miles. :thumb:The Only problem is the Front Valve cover Bolt Snapped off. I have some Easy outs So I can try to get it out.

[motorgroove]

so is there anyone in So. Cal that might be able to give me a hand on this project? Preferably someone that has pulled the head before

thanks,

[motorgroove]

jughead let me know how much you want for the head

thanks

[Jughead]

Will Do.I have it n my shop where I an work on it in the Dry.If its not too Cold tonight I'll start Stripping and Inspecting.I was going to do a Compression check last night but I don't have an Adapter the size of the Sparkplug.