News:

Protect your dainty digits. Get a good pair of riding gloves cheap Right Here

Main Menu

GS500E - Just removed ugly fairing and now bike won't turn over

Started by TobyR, December 01, 2006, 05:55:42 AM

Previous topic - Next topic

TobyR

Just converted my bike back to it's naked form:



I have a few problems:

1) The bike won't turn over when I press the starter button, the lights work and the bike runs when it's bump started, any ideas?
2) I don't know where all the wires go, they're hanging out everywhere behind the headlight with no obvious place that they should be put.
3) How is the front brake cable routed? Mine goes behind the headlight but this doesn't look like a good place for it
4) Are those the right size indicators or are they the smaller ones on the front?

Any shots anyone could provide of the headlight area of their bike, brake cable routing etc would be much appreciated as well as someone coming up with a simple fix for the bike not turning over! I am really bad at electronics.

(Excuse the appearance of the bike, I'm waitin for my order of Muc-Off to come through)

This is a UK spec bike, I don't think it has a clutch switch (I can start it in gear with the clutch out) but it does have a sidestand switch. I don't think this is the problem though because the bike will bumpstart?

Thank you so much for any help you can give me,

T

Riding a 1995 GS500E/S, completely stock  apart from Renntec Luggage and front fairing.

Egaeus

1.  Check your clutch switch.

I can't tell enough from your picture to help with anything else.
Sorry, I won't answer motorcycle questions anymore.  I'm not f%$king friendly enough for this board.  Ask me at:
webchat.freequest.net
or
irc.freequest.net if you have an irc client
room: #gstwins
password: gs500

pantablo

Pablo-
http://pantablo500.tripod.com/
www.pma-architect.com


Quote from: makenzie71 on August 21, 2006, 09:47:40 PM...not like normal sex, either...like sex with chicks.

dgyver

Quote from: TobyR on December 01, 2006, 05:55:42 AM
....
I have a few problems:

1) The bike won't turn over when I press the starter button, the lights work and the bike runs when it's bump started, any ideas?
2) I don't know where all the wires go, they're hanging out everywhere behind the headlight with no obvious place that they should be put.
....

#2 probably has something to do with #1.
There are a few connections (US spec bikes) that are not used but most will connect to only one place.

Here is an 04 wire diagram. I do not have a pre-04 diagram handy.
http://www.bbburma.net/Scans/Suzuki_WiringDiagram_04.jpg
Most connections should be the same for what you are having to deal with.
Common sense in not very common.

TobyR

Sorted,

One of the wires had come loose inside the headlight, the starter wire (Green/Yellow)

Cheers,

T
Riding a 1995 GS500E/S, completely stock  apart from Renntec Luggage and front fairing.

SMF spam blocked by CleanTalk