Spring GS Project w/ Pictures

[bucks1605]

Thanks for the prep tips guys.

[Tang]

diggin the bike

[gstwizzle]

Thanks

[RobTheTyrant]

So the weather is shaping up around here in NY.... fresh picture before I take it back apart to finally start the rest of the stuff I didn't get to.

Where in NY?

[The Buddha]

OK Dgyver, I didn't measure it exactly, but it looked an awful lot like if you turn the aluminum stem to the 30mm OD it will turn up to be far too thin, BTW I have a cracked stem on a GSXR and an egged one on a GS (the one that was put in with a clip) to not trust the stock one even. I dont trust any machinist enough to do that and I dont even trust the GS ones that are in with the clips, however the GS stems we toss anyway, so that dont matter.
If I had to, I'd make a stem entirely out of 6061 solid rod over turning anything stock down. Of course cutting grooves to shorten it for clips etc is all OK possibly cannot hurt.
Cool.
Buddha.

[gstwizzle]

Rochester NY

[gstwizzle]

does anyone out there happen to have a bandit 1200 swingarm?!?!? JW