IGNITION ADVANCER??

[gs5oh]

what exactly does one do, and wasn't a member here doing them for free??

[tmckay]

http://www.gstwins.com/forum/viewtopic.php?t=1239&highlight=ignition+advance


I asked the same question  If that link doesn't work, do a search for "ignition advance"; look for a thread started by klimber.

Trev

[J-Lo]

Nothing is FREE.  I hope you aren't close to your left arm....cuz that's what you need...  

Look around...there are 3000 posts on I.A.'s...

[pantablo]

Nothing is FREE.  I hope you aren't close to your left arm....cuz that's what you need...  

Look around...there are 3000 posts on I.A.'s...

Wont cost you that much-just your stock one in exchange-Bob Broussard may have to start charging a small fee if the demand gets out of control but for now he's been doing them for free (with core exchange).

[Bob Broussard]

I've raised my price to $5.00 for shipping and handling.
I've got one ready with 2 more to mod. Contact me with your mailing address and I'll ship one out.
Then when you get it you can put your stock rotor and 5 bucks in the box and send it back to me.

[gs5oh]

before laughing, remember that i am new to the motorcycle world.
how hard is it to take out my rotor???

[cruisedaddy]

> how hard is it to take out my rotor???


Joe it is the very acme of simplicity and takes 105 seconds working at a leisurely pace.  Just take off the magneto cover (the RHS thing that says "SUZUKI"), unscrew the nut holding the exising rotor on (the metal thing, right there in the center!), pull it off, put the new one on, tighten the nut back down (a dab of loctite would not be a bad idea) engage the pin and tighten it up).  Then just put the cover back on.  I seriously doubt there are many things you could to your bike that are easier.  Polishing the gas tank is more difficult!  

[pantablo]

very very simple...

http://www.gstwin.com/ignition.htm

[st-185gt]

I've raised my price to $5.00 for shipping and handling.
I've got one ready with 2 more to mod. Contact me with your mailing address and I'll ship one out.
Then when you get it you can put your stock rotor and 5 bucks in the box and send it back to me.

Hey Bob, do you mind shipping to Toronto Canada how similar is this to the V&H advancer?

thx!!

[Rashad]

Hey bob i pmed you. I have an extra one, so if you can send me one i can send you the stocker and 5 bucks.

[cgreenland]

bob, i pm'ed you too.  i hope you're not swamped in requests...

[Bob Broussard]

I am getting kinda swamped with requests. I only have 3 rotors right now. They're spoken for.
So until I get the exchange rotors I won't have any more for a few days. If someone wants to send their rotor and have me modify it, I could do that. I don't mind sending to Canada or any where else, it may cost more for shipping of course.
Also, I screwed up and deleted my personal messages by mistake.
I remember someone named Chris contacted me. Please contact me again Chris.

[Bob Broussard]

Hey bob i pmed you. I have an extra one, so if you can send me one i can send you the stocker and 5 bucks.

Rashad
If you could mail the extra rotor to me, I could modify it and send it back. Otherwise I have to wait for some other ones to show up. That will take at least a week from Monday when I send the 3 I have now. My address is;
Bob Broussard
761 Alvarado Dr.
Salinas, CA. 93907

[Bob Broussard]

I've raised my price to $5.00 for shipping and handling.
I've got one ready with 2 more to mod. Contact me with your mailing address and I'll ship one out.
Then when you get it you can put your stock rotor and 5 bucks in the box and send it back to me.

Hey Bob, do you mind shipping to Toronto Canada how similar is this to the V&H advancer?

thx!!

The rotor is modified to match the V&H advancer. There are a couple options. If you can spare the rotor, you can send it and I'll modify it and send it right back.
Or you can wait until I get some exchange rotors for the ones I am sending out, then send yours in exchange. Let me know and I'll give you my address.

[Joris]

Read all about it on my site, the modification section. There is also a manual on how to do it if you can`t get your hands on an ignition advancer. Good luck!

[Rashad]

Hey bob i pmed you. I have an extra one, so if you can send me one i can send you the stocker and 5 bucks.

Rashad
If you could mail the extra rotor to me, I could modify it and send it back. Otherwise I have to wait for some other ones to show up. That will take at least a week from Monday when I send the 3 I have now. My address is;
Bob Broussard
761 Alvarado Dr.
Salinas, CA. 93907

Excellent! youll be gettin a rotor from me!

[Rashad]

Hey bob, kinda dumb question..but do you need just the rotor? or the whole assembly that it goes into with wire harness etc?

[cgreenland]

I am getting kinda swamped with requests. I only have 3 rotors right now. They're spoken for.
So until I get the exchange rotors I won't have any more for a few days. If someone wants to send their rotor and have me modify it, I could do that. I don't mind sending to Canada or any where else, it may cost more for shipping of course.
Also, I screwed up and deleted my personal messages by mistake.
I remember someone named Chris contacted me. Please contact me again Chris.

that was me, bob.  i just pm'ed you again...
thanks!

[Bob Broussard]

All anyone needs to send is the rotor only.

I sent the 3 rotors out today (Mon.). The good guy/Jbix/Dond6
I have more addresses written down for the next batch. Howeman/Gs5oh/Cgreenland.
Srinath is sending his rotors first so I can modify them. Rashad will do the same. The only address missing is ST-185gt. If there's anyone else let me know.

[Piper5177]

What is Bob spelled backwards?

You are the man Bob!   By the way, how is the race bike doing?