Best chain tool ever!!

[spc]

Stupid master link was frozen up when I went to change my chain today...........I got impatient with the hacksaw and the cut blade with the dremel.  So  I pushed the wheel all the way forward and slipped the chain off and let it lay on the ground.  I then proceded to break out my trusty friend Mr. Axe.  Worked great.  And the new chain is friggin great

[natedawg120]

Dremel should have cut it off great, just takes some high revs and a little time.  I wouldn't swing an axe anywhere near my bike, cause if i hit it i would be really really really pissed at myself....

[RVertigo]

I pulled my old master link off with a screwdriver and hammer...   Then I connected the new chain to the old one and ran it through...

Then I used plyers to put on the new master link.


In other words...   I'm a good example of how NOT to put on a chain.

[natedawg120]

I pulled my old master link off with a screwdriver and hammer...   Then I connected the new chain to the old one and ran it through...

Then I used plyers to put on the new master link.


In other words...   I'm a good example of how NOT to put on a chain.

Seems like something i might have tried had i not had the dremel.  That or cut the b*&^h with bolt cutters

Edited because a bad word didn't get filtered

[RVertigo]

My dremel battery died.     Once I hacked at it, it was too late to go back so I found a way...

[natedawg120]

Yeah that suck, the first one i had the battery died too.  Then I got a great multispeed corded dremel and its been cutting things great since 2000

[RVertigo]

Condo Life == No power source in the garage.

[natedawg120]

My apt doesn't have outdoor power either.  I have very long extention cord that I hang out the sliding glass door, and drop down to the ground, from 3rd floor.  Then I plug in my dremel and chop away at whatever I need to.  Looks getto but gets me power

[spc]

I was thinking about a 1cm chunk of Detcord, but I decided not to given a full tank of gas    Didn't really want to take the chance My dremel sucks it's the cheapo battery one 10k rpm max

[natedawg120]

yeah mine is a 35k rpm.  It rocks, can take a bit to chew through really hard metal but its great.

[nightrider]

did you see Harsh Times yet, spcterry?

[spc]

Nope, not real big on movies....don't see any point in watching something about life when you can just live it yourself   i do make exceptions for classics and Military based movies though.

[nightrider]

the internets dont count as real life, terry... and you would relate to that movie dude I promise u. If you dont find it highly awesome I will send you the $3.50 rental fee okay?