Doing 1000km service myself???

[Dober]

Im really tired of the service I got at the local dealership and theres not really anyone close by and I am thinking of doing the service myself tommorow.

Other than an oil change and lubricating the chains and cables, what else do they do?

They make sure some of the bolts are tightened or something but what all do they go over??

Any tips for me?

[WildBlue]

Initial service --  600 miles or 1000km:

    * tighten cylinder nuts and exhaust pipe bolts
    * Inspect valve clearance, adjust if necessary
    * Inspect all fuel lines for leakage
    * (California models) Inspect evaporation canister and vapor lines
    * Change engine oil and replace filter
    * Check engine idle speed; adjust to 1200 rpm if necessary
    * Check clutch adjustment; adjust if necessary
    * Check drive chain tension; adjust if necessary
    * Inspect all brake hoses for leakage
    * Check brake fluid levels in both master cylinders; add fluid if necessary
    * Check brake pad wear
    * Inspect tire condition and air pressure
    * Check steering operation; adjust if necessary
    * Check operation of front forks
    * Check rear suspension operation
    * Check all chassis bolts and nuts for tightness; tighten if necessary

It's not a difficult service to do if you want to do it yourself.  On the other hand, doing it yourself might void the warranty, you might want to look into that.

For 99% of the maintenance needed by our bikes, I've found the Clymer + Haynes manual combination adequate.  Also, you will need tools in metric sizes.

[Alphamazing]

Any tips for me?

Do a barrel roll.

[spc]

Naw, don't listen to alpha.   Stoppie down the onramp to the interstate.    Best maintenance ever