Assorted main, pilot jets, needles, carb parts.

Started by bosozoku, July 13, 2007, 02:20:48 PM

Previous topic - Next topic

bosozoku

I have the following parts available:

2 #40 pilot jets.  Non-bleeding, brand new.
2 #37.5 stock pilot jets.  Used.
2 #135 main jets.  New.
2 #140 main jets.  One has a ding in the side.
1 #150 main jet.  New.

2 Dynojet needles.  Off a bike with less than 5k miles, so unlikely to be worn.
1 stock needle.

Misc carb parts.  2 needle seats, float bowl, slide spring.

PM me if you need any of this stuff.


Slater1601

How old are the needle seats? I'm assuming these are the round tubes with the o-rings? that hold the needle valve?

bosozoku

Quote from: Slater1601 on July 14, 2007, 06:50:32 AM
How old are the needle seats? I'm assuming these are the round tubes with the o-rings? that hold the needle valve?

4.5k miles when I replaced them.  I did a complete carb rebuild and new seats came with the kit.   The carbs turned out not to actually need a rebuild  (the problem was a bad install of a Dynojet kit). 

-b.

slowinthestraights

93 GS500
120/60-17 F      Power
160/60-17 R       Race
'89 Bars/Yoshimura Full System/K&N Lunchbox/V&H Ignition Advancer/SV650 Mirrors

SMF spam blocked by CleanTalk