News:

New Wiki available at http://wiki.gstwins.com -Check it out or contribute today!

Main Menu

WTB - Misc Parts

Started by DLW, August 23, 2007, 03:08:46 PM

Previous topic - Next topic

DLW

Looking for some Misc parts to replace on my '92 GS


  • Front Brake resevoir screws (one of mine is stripped) - Received and Installed. - Thanks Sterling!!
  • Front fork reflectors (that are mounted on the side of the forks, I'm missing one)  I know some of you remove them
  • Rear fender (mine is cracked almost in half) - Received and Installed!! Thanks Andrew!
  • Gauge "bucket" (the plastic that the gauges mount in, mine is cracked almost in half) - Received and Installed!! Thanks Aaron!!
  • Gauge Dash (mine is rusted and bent) - Received and Installed!!  Thanks Aaron!!
  • Factory front signal lens/signal.  (One of mine is cracked/broken) - Received and Installed!!  Thanks Andrew!!

As you can tell by the busted up parts, my bike has been dropped on the right side(not by me).  Luckly no major damage was done other than to the plastic parts.

If anyone has any of these that they are willing to part with for a reasonable price and shipping please PM me so we can work out the details.

Thanks muchly in advance.

DLW
Newbie '92 GS Owner/Rider

92 GS500E - '89 clip-ons, '04 signals and rear fender(pending 'ectomy), new dash and gauge buckets.

starwalt

#1
Sounds like typical "left outside" GS conditions.

Let me look through my "inventory" and get back to you.

I just saw a rear fender on ebay this week. There are several CLICK HERE

You are going to do better just buying the gauge bucket. It is only around $40 or so (I think) new. Most used ones are either cracked or sun faded and ready to crack.

The bracket on the other hand is priced crazy -- real crazy.  You might be better off finding someone to strip it and powder coat it. It will be better in the long run.
-=Doug......   IT ≠ IQ.

God save us from LED turn signal mods!

Get an Ebay GS value  HERE.

1990 GS running, 1990 GS work-in-progress, 1990 basket case.
The trend here is entropy

coll0412

I can help you with all of it less the factory front signal and the front brake resevoir screws ohh and I have a set of stock bars if you need them still also(last buyer bailed on me)
CRA #220

coll0412

found a set of factory turn signals in the garage, but now I can't find the fricking reflector...doh
CRA #220

kellehar

I have one front signal in good shape no cracks in the lens
94 zx6e
89 GS500 E

DLW

Thanks for all of the responses....I have updated my original post on items that I have been offered.  If anyone has any of the other items....I would greatly appreciate them...

Thanks,

DLW

92 GS500E - '89 clip-ons, '04 signals and rear fender(pending 'ectomy), new dash and gauge buckets.

DLW

Got the 'new' parts installed over the weekend.  Here are my updated bike pics.

My '92 GS Slide show.

DLW

92 GS500E - '89 clip-ons, '04 signals and rear fender(pending 'ectomy), new dash and gauge buckets.

SMF spam blocked by CleanTalk