News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

Can this be fixed?

Started by CndnMax, September 23, 2007, 04:09:30 PM

Previous topic - Next topic

CndnMax

I dented a small part of both my rims lip only on the right side tho, i hit a  big ass pothole that i couldnt really avoid- im surprised i didn't go down i just stood up and said %$#$(*#)(*$#)(@. Can this be fixed or will i need new rims?  :mad:

erbilabuc

it can be fixed by any legit machine shop but the problem is that it will require repainting/recoating. It will be cheaper to buy a used one off ebay
riders formely known as IMPORTBABE

dgyver

Will's Rim Repair (864-787-1351) does them for $60 flat rate. Not sure about shipping since he is local to me. He has straightened several wheels for me, better than from the factory. He is probably the cheapest in the nation, some charge by time. I would not recommend him if he did not do such good work. None of the factory paint was damaged. One wheel had been repainted and the yellow paint was darkened from the heat.

Like IBabe said... I would look for new wheels. Probably come out cheaper.
Common sense in not very common.

CndnMax

Would it cause any serious problems even if its jsut a small bump on the lip? i rode it home and nothing seemed to be different.

dgyver

Depending on how deep. The lip can be bent out some as well. I would check the pressure to see if it drops. If you do not feel any hopping, you should be good.

I have front wheel from a track bike with a noticable dent. I never could tell it was damaged when riding but could see it without spinning it. The tire is shagged to the edge.
Common sense in not very common.

CndnMax

I'll keep a close eye on the air pressure. I took another look at it and it looks very minor, you cant seen the dent on the rear rim i just feel it with my fingers. heres the best pic i could get of the front rim. http://img92.imageshack.us/img92/6425/img1561be0.jpg

dgyver

Tough to tell completely but looks like just the lip is bent out. Just watch the pressure.

Common sense in not very common.

Affschnozel

I've had a small dent on the rear rim lip with no pressure loss ,eventually was taken care of with a hammer and a piece of wood (it was bulging outwards)

'97 GS500EV: Sonic Springs 0.85 + 15W 139mm oil level (Euro clip ons+preload caps),125/40 jets Uni filter + stock can, Goodridge SS line , LED blinkers ,Michelin Pilot Activ tyres ,GSXR1000 Rectifier
http://www.youtube.com/watch?v=FLPRzDenm1w
http://www.dailymotion.com/video/x2tvoa

frankieG

i you need a set let me know, i have a spare black rear and white front
liberal camerican
living in beautiful new port richey florida
i have a beautiful gf(not anymore)
former navy bubble head (JD is our patran saint)

CndnMax

Right now they seem to be holding air pretty good, i'll let you know if things change frank. Does the stealership sell touch-up paint, i scrapped it on the road in a turn- i have no clue how as i was only leaning maybe half way.

SMF spam blocked by CleanTalk