News:

Need a manual?  Buy a Haynes manual Here

Main Menu

Front SS Brake Line For 2004 GS

Started by kml.krk, November 23, 2007, 07:31:39 PM

Previous topic - Next topic

kml.krk

I'm looking for FRONT SS brake line for my 2004 GS and I'm not sure if all SS brake lines fit all years or there are specific ones for specific years  :dunno_white:
can you help me a little and provide with some links to the cheap front SS brake line??
thanks a lot
KaMeL
Yellow 2004: K&N Lunchbox, Leo Vince SBK, 2005 GSXR Turn Signals, 20/65/147.5, 15T front sprocket, Progressive Springs etc...

"Bikes get you through times of no money better than money gets you through times of no bikes." - Phineas

kml.krk

read 18 times and nobody willing to help...  :cry:

just tell me if this is going to fit??  I emailed guy and he said it will but I'm not sure if the bolt is right
here is the link:   http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=STRK%3AMEBTOX%3AIT&viewitem=&item=110197781965&_trksid=p3984.cTODAY.m238.lVI
Yellow 2004: K&N Lunchbox, Leo Vince SBK, 2005 GSXR Turn Signals, 20/65/147.5, 15T front sprocket, Progressive Springs etc...

"Bikes get you through times of no money better than money gets you through times of no bikes." - Phineas

beRto

I just replaced mine a couple of months ago.  I have a '95, but I assume the brake lines are the same.

I measured the lines at 30" front and 28" rear. The banjo fitting on the front caliper had a 30 degree bend. The three others were straight.

I can't tell what the length of the eBay brake line is; I suggest you ask the buyer. I know he said it would fit a GS, but be a "little long". You should probably find out how much to make sure you don't have too much slack. Also make sure you use new crush washers (it looks like those are included in the eBay case).

The only installation hassle I had was getting a torque wrench on the rear caliper. The exhaust can was in the way and I didn't want to remove it just to tighten a single bolt, so I "guessed" at the torque. Either way, this won't affect you if you only replace the front line.

Hope this helps!

Roberto.

Kasumi

.... Very rarely used a torque wrench in my life... I think i have honed hands, i just guess the torque and its usually right if you check it with a torque wrench.
Custom Kawasaki ZXR 400

SMF spam blocked by CleanTalk