News:

Need a manual?  Buy a Haynes manual Here

Main Menu

Brake disc for GSXR wheel swap question....

Started by javio1, August 15, 2003, 08:28:16 AM

Previous topic - Next topic

javio1

I need the brake rotor for my 88-89 GSXR wheel. I came across this list and I guess that the same rotor was used on a few different bike. Can someone confirm or give me the prpoer info? Thanks. Here is the list....
MD 3008 Rear S
GSF 600 Bandit ST/S/SV/V 96-97 240
GSF 600 SY/SK1/SK2/SK3 00-03
GSX-R 600 WN/WP 92-93
GSX 600 FW/FX/FY/FK1/FK2/FK3 Katana 98-03
RF 600 RR/RS/RT/RV 94-97
SV 650 X/Y/K1/SK1/K2/SK2 99-02
GSX 750 W/X/Y Inazuma 98-00
GSX 750 FW/FX/FY/FK1/FK2/FK3 Katana 98-03
GSX-R 750 J/K/L/M/N/WP/WR/WS 89-95
RF 900 RR/RS/RS2/RT/RV/RW 94-98
GSX-R 1100 K/L/M/N 89-92
GSX-R 1100 WP/WR/WS/WT/WV/WW 93-98
GSF 1200 SV/SW/SY/SK1/SK2/SK3
K1/K2/K3 96-03
GSX 1300 RX/RY/RK1/RK2/RZK3 99-03
People take these things too seriously!

JasonB

Might see if you can find one with the same bolt pattern etc and its a larger diameter rotor and it will work better than the GSXR one cause its a tad on the small side and the pad doesnt make full contact.

If you do find one let us know what one you used (larger diameter rotor)
"Hairy Gutter" The Spot Behind Pantablo's Knee.
"Dirty Gutter" The Space Between Pantablo's Ears.

The Buddha

Silly me I'd think the gsxr 88-89 rotor and caliper would be a good fit...Seriously...The whole assy should be adapted to fit I think.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

javio1

Hey Srinath, are you going to the boneyard anytime soon? If so, can you check on a rotor for me?  :mrgreen:
People take these things too seriously!

The Buddha

Hey I am 3000 miles from boneyard...anything that requires subjective stuff like this they will screw up. I have tried to get them to do stuff by phone but its near impossible...They'd rather just stand there at the counter and sell you new stuff...I wanted an R1 tail light... a few eons ago...I am still waiting. If I wanted new I'd have got it long ago...They are just bad when it comes to stuff like looking for stuff...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

JasonB

Its not the caliper or rotor that is the real problem its the caliper mount, it puts the caliper a bit high so the whole brakepad doesnt contact the rotor all the way. It needs to be moved down or the rotor diameter increased to go up.
"Hairy Gutter" The Spot Behind Pantablo's Knee.
"Dirty Gutter" The Space Between Pantablo's Ears.

pantablo

I think Ken said that the gsxr rotor is smaller diameter than GS, causing less than full contact but that it wasn't really anything to worry about.

Where is Werase643 when you need him?
Pablo-
http://pantablo500.tripod.com/
www.pma-architect.com


Quote from: makenzie71 on August 21, 2006, 09:47:40 PM...not like normal sex, either...like sex with chicks.

SMF spam blocked by CleanTalk