High beam indicator light does not work

[510]

Recently, I've noticed that the high beam indicator light in the gauge cluster doesn't light up anymore. This is weird because it's the only light that doesn't work; all the rest of them are fine.

I can't think of any reasons why it doesn't. The only mod I've made so far around the gauges is installing clip-ons, so the gauge cluster is now mounted to a cut-out steel plate instead of the original top plate.

Before I tear into the gauges with a multimeter, I'd like to know if anyone else had this problem, and if there's some really easy fix that I'm overlooking.

Thanks!

[gsJack]

Probably the bulb burned out.  Check that first.  I use a #194 bulb from auto parts store or Walmart.

[mullethunter3]

Most of my indicators have burned out since I've bought the bike. First it was the high beams, then the turn signals (but I took those off, so it doesn't really matter) and now the tach bulb has gone out. I'm going to replace them with some LEDs so I don't have to mess with them anytime soon.  Check out the wiki for part numbers.

[CBR JOCKEY]

Lift the blue lens up with a knife and the bulb is underneath....I am on my third bulb cuz I ride with Hi beams on all the time.

[Affschnozel]

+1
Replace with LEDs and you won't have any issues with them burning out