89 clip ons

[flipher]

can you get them  from suzuki oem parts or is this just crazy talk

[bucks1605]

I don't know about that. I was looking at the parts fiche on bike bandit and it looks like some of the parts have been discontinued.  Even if you can buy it from the dealer, it would be way over priced. Your best bet would be to post a wanted ad here, or keep an eye open on ebay.

[flipher]

where did you get yours at

[510]

You can get aftermarket clip-ons, like vortex or woodcraft for around $70-$90. They got them all over ebay, just make sure you get the 37mm ones.

[flipher]

but if i do that i have to mod right they wont just go right on like the 89s

[510]

I think that even with the '89's, you will have to do some modding. The gs has had some significant changes over the years that prevent the OEM clip ons from just going straight on.

If you want to put the clip-ons above the top triple, you'll have to lower the forks a bit and maybe take the top plate off. If you want to put the clip ons below the top triple, then you will definitely need to move the forks up to keep the handlebars from hitting the tank, since the tank on a gsf is more flat, and wider than that on a 89 gse.

[flipher]

i think im just going to go with one of these http://www.suburban-machinery.com/sv650.htm    or just some clubman i dont know what ones i like more yet

[pjm204]

No mods needed for the 89 clip ons...at least I didn't need to mod anything to put them on my '99. The bike has stayed pretty much the same the whole time it's been made.

[The Buddha]

89 is a direct fit on a 89-00 bike.
I have a good powdercoated one - all shiny black, and I'll toss in a shiny black top plate of the dash to match, you just send me yours when you get mine.
All for $100.
On a 01-08 bike you need to bend the bars out ~5 degrees else they hit the tank.
Cool.
Srinath.

[flipher]

89 is a direct fit on a 89-00 bike.
I have a good powdercoated one - all shiny black, and I'll toss in a shiny black top plate of the dash to match, you just send me yours when you get mine.
All for $100.
On a 01-08 bike you need to bend the bars out ~5 degrees else they hit the tank.
Cool.
Srinath.

you have them

[Boston500F]

I have a set that I'm not using, came off my 04 gs....direct bolt on, no clearance issues, I can lock the bars etc.....doesn't touch the tank on either side.

I'll entertain offers, have pics....but Srinath's deal seems unbeatable....I paid a lot more...bought them from e-bay, replaced the bars with vortex and had them sprayed at a bodyshop, ouch...

[Boston500F]

sorry, If interested or questions e-mail me, mark8marco@yahoo.com...not on here that often. THanks!

[bucks1605]

where did you get yours at

I bought mine here from a member, great price too. $85 for everything.

[flipher]

sorry, If interested or questions e-mail me, mark8marco@yahoo.com...not on here that often. THanks!

what was the price of the ones you have