k&n filter and box

[Pkaaso]

RU-2970 $29.95  That is what I ordered.  It should come Pre-oiled.  I'm still curious about that.

Let me know.
Paul

[chimivee]

i have had the carbs off before, but how difficult is it to jet it correctly?  what size jets should i use?  any other things i'm missing?

Well, pulling the carbs out is probably the hardest part - so it's easy.  Once they're out it takes just a few minutes to install the new jets.  I think the "jet it correctly" part is a bit of trial and error.  But I think 40 pilots, 2 washers, 150 mains is where you'd start... I think there's info on Pablo's site... or there's Srinath.

[The Buddha]

I have the cables re fabbed 6 inches longer choke and 9 inch longer throttle and they run by the frame instead of right down the middle. The whole carb thing takes me 10 mins max...Take off the tank and undo the manifold clamps and toss them over the side. Then I can even put the tank back on and measure float level etc using longer fuel lines. Also once the pilots are taken out and the brass plugs drilled out all the changes can be made with the carbs on the bike if you have the right tools.
Cool.
Srinath.