News:

Registration Issues: email manjul.bose at gmail for support - seems there is a issue that we're still trying to fix

Main Menu

ignition system not happy

Started by Scott_DC, June 16, 2008, 12:43:33 PM

Previous topic - Next topic

Scott_DC

I've been wrenching on my '94 GS500ER a bit lately, and I think I have two problems with the ignition system. First - I checked the coils. On the primary side, they both read fine. On the secondary side, one reads 25K, the other reads 35K. That's out of spec - should I replace it or will that function fine?

The other is one of my pickups appears to be going.... often the bike is running on one cylinder. In the morning, it runs perfect, but half-way to work I lose the left cylinder at RPM's below 5000. Since my commute is completely stop-and-go traffic lights and stop signs... having no low-end really is not fun.

I dropped the bike on some ice this spring - was going around a corner at 2mph and bike just fell to the right and broke the cover that shields the pickups and while I was waiting for a new one to arrive, I think some water got in there. I'm hoping to get in there and see if I can repair any damage... I'd rather not have to buy a $125 part. Does that sound like a reasonable explanation of what's wrong with the pickup?

Thanks!
1994 Grape GS500
Progressive Springs
Progressive Owner

Scott_DC

I checked the signal generator last night - one was 290 ohms, the other was 2,000 ohms. Guess that means I need a new one. Now what about my ignition coil?
1994 Grape GS500
Progressive Springs
Progressive Owner

ben2go

PM starwalt.He has a way of testing these things,IIRC.
PICS are GONE never TO return.

beRto

It looks like you've already done some testing, but this document from John Bate's lists the whole battery of electrical tests specific to the GS500:
http://www.bbburma.net/Documents/JohnBates_ChargingCircuitTests3.pdf

That information is summarized (and customized for GS500) from:
http://www.electrosport.com/technical-resources/library/diagnosis/fault-finding-guide.php

ben2go

Quote from: beRto on June 17, 2008, 12:48:51 PM
It looks like you've already done some testing, but this document from John Bate's lists the whole battery of electrical tests specific to the GS500:
http://www.bbburma.net/Documents/JohnBates_ChargingCircuitTests3.pdf

That information is summarized (and customized for GS500) from:
http://www.electrosport.com/technical-resources/library/diagnosis/fault-finding-guide.php


This is for the charging system.He is having ignition problems with the engine.Maybe a bad coil or pick up.  :thumb:
PICS are GONE never TO return.

ben2go

Sorry beRto.  :cry:  Never mind the above post.Did see the post about checking the charging system.
PICS are GONE never TO return.

SMF spam blocked by CleanTalk