Chain change

[ben2go]

That is the carb vent hose.If you have fuel coming thru, the float needles are either set wrong or they are hanging open.You need to change your oil also.If you have fuel levels that high in the carbs,the fuel is also running into the cylinders and down into the oil.This can lead to bearing failure and seized piston.Also check your air box for fuel.

[skinnypac]

There is nothing in the air box as far as fuel. I'm guessing changing the float level shouldn't be to hard. Thanks a ton for all the help.

[ben2go]

There is nothing in the air box as far as fuel. I'm guessing changing the float level shouldn't be to hard. Thanks a ton for all the help.

Checking float hieght.  http://www.bbburma.net/FloatHeight.htm

Setting float hieght.http://cgi.stanford.edu/~sanjayd/gs500/Maintenance/FloatHeight