News:

New Wiki available at http://wiki.gstwins.com -Check it out or contribute today!

Main Menu

Scratched Visor

Started by Villager, June 28, 2008, 09:17:56 AM

Previous topic - Next topic

Villager

The visor on my helmet has collected a number of scratches which are beginning to irritate me and impede my view. I looked into replacing it, but this would cost £25 ($50), which I think is a bit steep. Are there any tricks for reducing the visibility of scratches? My helmet is the Caberg Trip.
Mods thus far:

14 tooth front sprocket
Complete paint job, red to black
Oxford heated grips
Fenderectomy
GSXR foot pegs

...much more to come!

sledge

Xerapol might work if the scratching is very light. I have used it on plastic/perspex screens before and had good results.

http://cgi.ebay.co.uk/Xerapol-Scratch-Remover-Motorcycle-Visor-Screens-NEW_W0QQitemZ370063426615QQihZ024QQcategoryZ72203QQcmdZViewItem

GeeP

Depends on how deep.  I know there are some plexiglass "repair" compounds out there that you wipe on.  Plexus cleaner will remove and/or fill minute scratches.

I usually take out deep scratches in my safety glasses with 2000 grit sandpaper followed by rubbing compound, followed by buffing with white rouge and an open cotton wheel on a power buffer.

If you're careful, you'll preserve the optical clarity.  Check with a piece of 10x10 grid paper before wearing your potential "beer goggles".  ;)
Every zero you add to the tolerance adds a zero to the price.

If the product "fails" will the product liability insurance pay for the "failure" until it turns 18?

Red '96
Black MK2 SV

Villager

Thanks for the advice, I'll look into that.

On a related note, does anyone know if the "anti-scratch" visors on the market actually any more scratch resistant?
Mods thus far:

14 tooth front sprocket
Complete paint job, red to black
Oxford heated grips
Fenderectomy
GSXR foot pegs

...much more to come!

mikedrees

i second the plexus. get all 3 stages & it will look like new. 3 is for heavy scratches, 2 id for medium to light & 1 if for very light & general cleaning.
3M TA3

GeeP

My Shoei shield claims to be scratch resistant.  I don't have any scratches, even though I usually grind away at hard bugs with my fingernail when I can't get 'em off.  It seems harder to scratch than normal Lexan or Plexi, but YMMV.
Every zero you add to the tolerance adds a zero to the price.

If the product "fails" will the product liability insurance pay for the "failure" until it turns 18?

Red '96
Black MK2 SV

ohgood

Quote from: Villager on June 28, 2008, 09:17:56 AM
The visor on my helmet has collected a number of scratches which are beginning to irritate me and impede my view. I looked into replacing it, but this would cost £25 ($50), which I think is a bit steep. Are there any tricks for reducing the visibility of scratches? My helmet is the Caberg Trip.

You need to see your eye doctor. No, I'm not kidding.

Your brain should make up for the scratch because you're moving your head and vibrating, gyrating, etc all the time on the bike. If those scratches don't "disappear" by your brain filling in the bits, something may be wrong.

I have a heavy stigmatism along with only about 1/2 my field of view in my left eye. Eye surgery helped, but still only 60% of my FOV is worth while. My ophthalmologists explained that if I ever noticed the pattern of distortion change, or become a nuisance, it's a since of trouble, and get checked immediately.

Your eyes are windows to your soul.

Get a checkup.

:)


tt_four: "and believe me, BMW motorcycles are 50% metal, rubber and plastic, and 50% useless

Villager

My wife is an optician - I'm well inspected!

The scratches I do have are in exactly the place you look when facing the road ahead. They're not so serious as to be dangerous, just annoying, like when you haven't cleaned your visor in a while.
Mods thus far:

14 tooth front sprocket
Complete paint job, red to black
Oxford heated grips
Fenderectomy
GSXR foot pegs

...much more to come!

SMF spam blocked by CleanTalk