where to get fuel hose?

[ben2go]

these lines are rated at 70F but get soft when driving but will not slip off woot

and i'm going to try that jb weld tomrrow on the petcock how long does it take JB weld to set?

I give it over night and have had no problems.It doesn't take much JB Weld and remember to block the vacuum port on the back part.I use a dime size drop out of each tube,mix till its a single light gray color.Keep an eye on it until the JB weld starts to harden.I have had it run on me.

[jp]

You can get polyurethane fuel line from Cycle recycle for $.80/ft. They also stock valve shims for $4.95 each.

http://www.crc2onlinecatalog.com/Index_Main_Frame.htm

[dgyver]

You can get polyurethane fuel line from Cycle recycle for $.80/ft. They also stock valve shims for $4.95 each.

http://www.crc2onlinecatalog.com/Index_Main_Frame.htm

Cool. They carry 5/16" poly line.
http://www.crc2onlinecatalog.com/fuel_lines.htm

[arbakken]

just go to a motorcycle shop. They have fuel line there, and it isn't expensive.