turn signal wire lengthening

[tripleb]

What kind of wire can I use to lengthen the turn signals wires?  I've replaced the OEM ones with micro ones and the wires are about 1.5" - 2" short.

[the mole]

Something about the same size or bigger than what's on them now, any colour you like! If you don't have a soldering iron, the easy way would be to get some crimp connectors and make a short 'extension cord' with the appropriate connectors at each end.

[sledge]

Something that will handle 3.5 amps @12v.......1mm dia PVC insulated will do. Chop a length off an extension lead, solder and heatshrink will be the most reliable method.

[LOUiE]

the OEM system is 18 guage.  My aftermarket signals were the same.

got some wire from Canadian Tire (which i realise most of you dont have) but I bet NAPA or another parts store would have it.

[The Buddha]

Something about the same size or bigger than what's on them now, any colour you like! If you don't have a soldering iron, the easy way would be to get some crimp connectors and make a short 'extension cord' with the appropriate connectors at each end.

This is one more reason I hate the damn aftermarket ones ... they always give you wire that is just a shade too short ... Like that much extra wire was gonna affect their bottom line.
Cool.
Buddha.