Whats up with my choke? (Its either 3500rpm or nothing)

[dwoloz]

Moving my choke lever to a position where RPMs increase at all, I get 3500-4000 rpm, too high if you ask me, right?
Any position of the lever lower than this and no choke is applied at all

I'm going to be doing a carb rebuild soon and would like to know if theres an additional procedure I should do while I have everything apart

[beRto]

Moving my choke lever to a position where RPMs increase at all, I get 3500-4000 rpm, too high if you ask me, right?
Any position of the lever lower than this and no choke is applied at all

I'm going to be doing a carb rebuild soon and would like to know if theres an additional procedure I should do while I have everything apart

Once it starts to warm up, my bike will idle at 4000 rpm if the choke is fully open. Your choke sounds like it's working fine!

[dwoloz]

Hm
But this is starting dead cold though, not warmed up. If I start it without choke, it will start but won't hold idle, it will die. If I apply even the slightest bit of choke it will rev to 4k. Shouldn't it be able to have choke applied and only rev to 2kish?