News:

Need a manual?  Buy a Haynes manual Here

Main Menu

issue with 98 ford expidition

Started by mach1, November 12, 2008, 04:32:49 PM

Previous topic - Next topic

mach1

So my mom has been having problems intermittently when she turns left into a parking stall and she engages the brake pedal she has no action then she presses it again and the brakes work fine. this only happens on a left hand turn into a stall.
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

ohgood

Quote from: mach1 on November 12, 2008, 04:32:49 PM
So my mom has been having problems intermittently when she turns left into a parking stall and she engages the brake pedal she has no action then she presses it again and the brakes work fine. this only happens on a left hand turn into a stall.

vacuum line, it's getting kinked or the master cylinder is shot. either way, need to get a handle on that QUICK !

could also be a brake line. hitting crap on the road does all kinds of wild , unimaginable things to the under-carriage.


tt_four: "and believe me, BMW motorcycles are 50% metal, rubber and plastic, and 50% useless

cafeboy

Did she have the brake pad replaced ?
If the caliper was not put on right the brake line may be twisted and when she turns left it gets kinked.
IF I COULD FRAME MY MIND---WHERE WOULD IT HANG ?
I've Seen The Future, and It's Cafeboy-Shaped.

mach1

pads were replaced a few months ago. i didn't happen before that. i guess ill go check it out tomorrow. I was supposed to replace the front for her along with the rear but i didn't have my torx socket with it was at work so she had a shop do the front and i did the rear, i hate shops after working in one for years you see some shoddy mechanics and most come from UTI an places like that.
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

cafeboy

Quote from: mach1 on November 12, 2008, 06:37:02 PM
shoddy mechanics and most come from UTI an places like that.
:laugh: :laugh: :laugh: :laugh: :laugh: :laugh:+1
Yeah, Thats where I would start.
Brake lines can be real funny if the caliper gets twisted around and put back on like that.
IF I COULD FRAME MY MIND---WHERE WOULD IT HANG ?
I've Seen The Future, and It's Cafeboy-Shaped.

yamahonkawazuki

Quote from: mach1 on November 12, 2008, 06:37:02 PM
pads were replaced a few months ago. i didn't happen before that. i guess ill go check it out tomorrow. I was supposed to replace the front for her along with the rear but i didn't have my torx socket with it was at work so she had a shop do the front and i did the rear, i hate shops after working in one for years you see some shoddy mechanics and most come from UTI an places like that.
hey now, i resemble that remark  :nono: :laugh: , but i always do my reps as , if this breaks, my ass is sued  :thumb:
Jan 14 2010 0310 I miss you mom
Vielen dank Patrick. Vielen dank
".
A proud Mormon
"if you come in with the bottom of your cast black,
neither one of us will be happy"- Alan Silverman MD

mach1

I checked the hoses and they seem fine no twisting or kinks when turned both ways. any other ideas
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

jserio

maybe it's just because it's a ford.     :laugh: :laugh: :laugh: :laugh:   sorry...really..i couldn't help it.    :cheers:   you're sure it only happens when turning left and braking at the same time?   not trying to say you're a moron or anything, just clarifying   :thumb:
finally a homeowner!
2009 Toyota Corolla LE

mach1

yup and its a fault in the ABS system my mom had a picture covering the Tach and once I took it for a spin I moved the pic and boom ABS light on. I just told her to take it to a shop and have them use their scanner to find the problem.
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

cafeboy

Quote from: mach1 on November 13, 2008, 08:49:15 PM
take it to a shop and have them use their scanner to find the problem.

:thumb:
IF I COULD FRAME MY MIND---WHERE WOULD IT HANG ?
I've Seen The Future, and It's Cafeboy-Shaped.

jserio

sometimes it's the simple things that lead us to the truth eh?  :cheers:
finally a homeowner!
2009 Toyota Corolla LE

ohgood

after a few tries of replacing an abs master cylinder on a chevy, we fixed it. the master cylinders were $600 each, and it was a warranteed repair. how did we fix it you ask ?




we sold the pos.


tt_four: "and believe me, BMW motorcycles are 50% metal, rubber and plastic, and 50% useless

yamahonkawazuki

yup i had a suburban which would do htat. it would apply ONE brake cylinder err one wheel, at random times. ( abs unit went out ) i afro-engineered a non abs unit onto it. doing away with abs, yes, but it fixed it. and it continues to drive to this day
Jan 14 2010 0310 I miss you mom
Vielen dank Patrick. Vielen dank
".
A proud Mormon
"if you come in with the bottom of your cast black,
neither one of us will be happy"- Alan Silverman MD

SMF spam blocked by CleanTalk