News:

New Wiki available at http://wiki.gstwins.com -Check it out or contribute today!

Main Menu

pictures of 2001 carbs..... thanks pkasso..

Started by TheGoodGuy, September 20, 2003, 01:34:20 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

TheGoodGuy

September 20, 2003, 01:34:20 PM
these are from mine..

who all have done their carb work.. please check and make sure my carbs are sorta like yours. I konw suzuki worked on mine, not sure if they jacked thigns up trying to fix the carb issue.


Location of the mixture screw.. we drilled it out and then use an EZ out on it.
http://officespace.dyndns.org:8080/2001-carb1.jpg

Carb Jets - now which is which?
http://officespace.dyndns.org:8080/2001-carb2.jpg

Same as above but better pic.
http://officespace.dyndns.org:8080/2001-carb3.jpg

now how do i repalce those screws in pic 1 for allen bolts..
'01 GS500. Mods: Katana Shock, Progessive Springs, BobB's V&H  Advancer Clone, JeffD's LED tail lights & LED licence plate bolt running lights, flanders superbike bars, magnet under the bike. Recent mods: Rejet with 20/62.5/145, 3 shims on needle, K&N Lunch box.

JohNLA

#1
September 20, 2003, 10:31:07 PM
Your pics are to big :o
On his tombstone were the words "I told you I was sick!"

http://johnla2.tripod.com/

Cire

#2
September 21, 2003, 09:47:05 AM
cool
what type of digi cam did you use ... the detail in the pics is really good
8)
"You can educate a fool, but you cannot make him think"  -  The Talmud

TheGoodGuy

#3
September 21, 2003, 12:25:13 PM
Quote from: Cirecool
what type of digi cam did you use ... the detail in the pics is really good
8)

its not my cam, but pkasso's and it think it was a nikon.
'01 GS500. Mods: Katana Shock, Progessive Springs, BobB's V&H  Advancer Clone, JeffD's LED tail lights & LED licence plate bolt running lights, flanders superbike bars, magnet under the bike. Recent mods: Rejet with 20/62.5/145, 3 shims on needle, K&N Lunch box.

Pkaaso

#4
September 21, 2003, 04:54:03 PM
Yea, it's a Nikon - Coolpix 3100 set at the highest quality.

I should have reduced the file size before I sent them to you Manjul, I didn't know you were going to post them.  

I was going for detail for you to see the jets and stuff.

Manjul,  Just take the float bowl screws or one of them to Ace Hardware and match with  SS Alen head bolts.  They'll set you back a couple three bucks.  Well worth it.

Paul
I don't want a pickle, I just wanna ride on my motorcycle. - Arlo Guthrie

Lex143ms

#5
September 25, 2003, 06:06:52 PM
i have my carbs off the bike but i cant open the bottom 8 screws, i tried with the impact screwdriver but maybe i will have to hit it a little harder.  the jets in your pics dont look like the ones i bought from suzuki as replacements (137.5, 62.5, 20).  who knows what mine really look like inside the bike though.  if i mess with the carbs i dont have to resync them do i?  cause i have no idea how to do that, but that is my concern with opening it up.  thanks all.
Whoo! Lets do it again, Rock 'n Roll
You're unique, just like everyone else.
LeX

TheGoodGuy

#6
September 25, 2003, 08:09:19 PM
i got that same issue..

what is the part #'s you got for your jets..

The suzuki dealer says that the picture on mine are not the stock suzuki jets or whatever.. the stuff that piper5177 said about the jets apparently mine arent the same replacements. so I need part #'s
'01 GS500. Mods: Katana Shock, Progessive Springs, BobB's V&H  Advancer Clone, JeffD's LED tail lights & LED licence plate bolt running lights, flanders superbike bars, magnet under the bike. Recent mods: Rejet with 20/62.5/145, 3 shims on needle, K&N Lunch box.

FD3S

#7
September 26, 2003, 10:49:08 AM
Yeah, Lex143ms, part numbers would be great if you still have the invoice.
Print
Go Up Pages1
User actions
SMF spam blocked by CleanTalk